sheet or roll ?

[wilson2]

A question for the experianced hands out there.
I want to get started in panoramic format and currently have an Omega View.
What are the drawbacks (if any) to just cropping the 4X5 sheet rather than
getting a 6X12 roll film back. I want to photograph a variety of subjects,
arch,lands,travel. I realize I will probably be purchasing additional equip. in the future (linhoff,fuji617,too dear for my budget). Any ideas,comments ?

 

[Dave Wooten]

Just shoot the full 4 x 5. You can crop to 6 x 12 etc. Mask when you print via enlarger, or mask with the mat board. Make your 6 x 12 marks on your ground glass for composing.

Drawbacks....4 x 5 film per shot is maybe more expensive, but you have the option of printing the full 4 x 5 image, or any cropped variation.

A 75 mm or 90 mm that covers 4 x 5 gives a nice wide perspective on 6 x 12.

 

[David A. Goldfarb]

An advantage of shooting 4x5" and cropping to panoramic of whatever aspect ratio you like is that you get a certain amount of extra rise/fall, because you could crop your image from the top, middle, or bottom of the frame. Also, if you only occasionally shoot panoramic, then you can batch all your film together by cropping from 4x5" and you don't have to carry a bulky rollfilm back.

It would make sense to use a rollfilm back, if you were mainly shooting panos and wanted the more convenient/less costly processing of rollfilm and rollfilm takes up less space, doesn't require loading in the dark, etc.

Take a look at the panoramas of Art Sinsabaugh--

http://www.indiana.edu/~iuam/online_modules/sinsabaugh/p_main.html

He generally used a 12x20" camera, but sometimes cropped to 3x20" and everything in between.

 

[removed account4]

i am a fan of cropping too .. saves you from "moths in the wallet syndrome"

 

[Jesper]

For a while I toyed with the thought of getting a 6x17cm or maybe 6x24cm but had to realise that owning a 8x10" with a Nikkor 120SW I wouldn't need one.
Cropping is the way to go as others have said before me.
If you want, you can make some cardboard cutouts in the sizes you want and use them to check the image as cropped. I find this helpful to see if the height inside the cropped image makes sense or not.

 

[Mike1234]

Assuming you're willing to pay for a decent 6x12cm back it's worth it for the convenience... provided you'll never want to crop to a shorter format, as others have mentioned.

 

[Seabird]

I would favour cropping from 4x5 but remember that there are films that are available in 120 that are not available in sheet sizes eg Delta 400, SFX 200 etc.

Cheers

Carey Bird
http://members.iinet.net.au/~cbird/index.html

 

[Bruce Watson]

A question for the experienced hands out there. I want to get started in panoramic format and currently have an Omega View. What are the drawbacks (if any) to just cropping the 4X5 sheet rather than getting a 6X12 roll film back. I want to photograph a variety of subjects, arch,lands,travel. I realize I will probably be purchasing additional equip. in the future (linhoff,fuji617,too dear for my budget). Any ideas,comments?

I crop 5x4 all the time. I tend to see scenes in three different aspect ratios. Normal 5x4, 1:1.618 (the "golden ratio", about 5x3), and 1:2.5 (classic pano, about 5x2). Because of this, it's much easier and cost effective to just use the one film size and crop as needed.

Not to mention the money you save by not buying a roll film back, and the weight you save by not having to carry a roll film back around with you (especially if you backpack).

 

[Allen Friday]

and the weight you save by not having to carry a roll film back around with you (especially if you backpack).

If you are shooting nothing but panoramic, this cuts the other way. A roll film back and multiple rolls of 120 film will weigh much less than the equivalent number of 4x5 holders.

 

[Mike1234]

I agree with Allen on the weight issue. As I stated earlier, if one never intends to crop shorter than 2:3 ratio and can afford a "good" roll film back it's worth it. A good used Horseman 6x12 can be had for approximately $400.

 

[Bruce Watson]

If you are shooting nothing but panoramic, this cuts the other way. A roll film back and multiple rolls of 120 film will weigh much less than the equivalent number of 4x5 holders.

IF I were only going to shoot panos, I'd buy a Fuji 617 and be done with it. But I'm not ever going to shoot only panos. I see in more aspect ratios than that. A failing, what can I say?

An alternative to traditional cut film holders is Fuji quickloads. Quickloads save a good bit of weight over traditional film holders. And presumably over roll film backs (I haven't done any weight comparisons myself as I decided against a roll film back and don't have one to weigh).

 

[Mike1234]

There are, as there always are, many "what if's" to consider that only the OP can answer. For me, the "what if's" clearly indicate purchase and use of a 6x12cm roll film back. But then, I'll only carry the light/small 6x12cm kit when I don't feel like carrying the 4x10in system... size/weight is the "major issue" "for me" for even having the smaller kit... and carrying several loaded sheet film holders is not part of the purpose of the small/light system. The 4x10in system I'll crop anywhere from 4x6 to 4x8 to 4x10.

 

[keithwms]

I definitely prefer the compactness of roll gear when travelling, and I also like the rapid-fire possibility when the scene is rapidly changing or if I simply think I will need to take several exposures. But... yeah, I'd rather have a croppable sheet of film in my hands when I go to the enlarger. I had a 612 back until recently (sold it) and it wasn't seeing much use. It was very nice but it was just collecting dust. However, there is a *big* difference in overall equipment volume when you go to 617. For 617 and 624, the case for a roll back is a bit better than for 612, I think. I am doing 4x10 now and like it a lot, though I am occasionally tempted to buy a 617 or 624 back to put on there. I do hope that some logic will persuade me otherwise!

Long live sheet film...

 

[Mike1234]

Ahh... if they just made 4" roll film and 4x10" roll film backs.

 

[keithwms]

Well... if you asked Shen Hao they'd probably make pretty much anything you ask for. I did at some point discuss the possibility of a 624 rollfilm back. They made me an excellent 5x8" back for next to nothing. I use 5x8 on the 4x10 camera, and like it a lot. Maybe I should try 5x10

 

[Mike1234]

^^^ or 5x12.

 

[2F/2F]

Sheet film has all the advantages that sheet film normally has. However, if it were me, I would probably choose roll film. I would also probably get three backs if I was "seriously" shooting this format for a lot of my pictures. I would definitely get at least two.

First of all, there are some emulsions you can get in 120 that you cannot get in sheet sizes. Fuji Reala, Portra 400VC, Fuji Pro 400H, Pan F, Delta 400, Delta 3200, etc. I wouldn't use the Delta 400, but all the others are some of my favorite films. There are also the two 800 color films by Kodak and Fuji. Yes, I would use fast films in a view camera on a tripod, because I like the way they look. It always bugs me that I can't get many of these emulsions in sheet sizes. Second of all, roll film is cheaper per shot, because you are not cropping as much when you print. Third, the bulk and weight issue is a great advantage of roll film. Film holders are the #1 hassle for me when lugging a 4x5 kit around. Then, you have no need for a changing bag if you want to reload. Finally, I think it is wasteful to shoot so much that is just going to get cropped out, unless you want to utilize the advantages of sheet film that I mentioned, such as individual development.

 

[Mike1234]

Speaking of cropping 4x5 to have either that ratio or anything in between... one can always take two exposure on 6x12cm shifted up/down. With a 1cm overlap that nets a roughly 10x12cm image (actual size closer to 92x112cm) but it's even squarer than 4x5. Of course, you'll have to stitch them in PS and crop as you desire. It's just another option.

 

[keithwms]

^^^ or 5x12.

No, that's on the slippery slope to 7x17. I know better than starting down that route....!

 

[wilson2]

Thanks to all for the variety of interesting viewpoints.
I want to throw a "what if " into the mix.
I want to use camera handheld at least half the time.
However, there will be times I will want/need swing&tilt. I have only once seen a 6X12 back for less than $600. I am going to look at a 6x12 Fotoman with a 58mmXl for $1K (makes the back look rather expensive).
I am trying not to paint myself into the corner of "needing" two cameras to shoot 6x12 !
Any ideas ?

 

[Mike1234]

Trying to not to paint yourself into a corner... HAH, HAH, HAH, HAH, HAH......