Sekonic 758D suppliers

Henry Alive

Subscriber
Joined
Aug 16, 2006
Messages
198
Format
Multi Format
I hope this question fits this forum. I am looking for a Sekonic 758D, as I think it could be the best meter for Zone System. When you look at ebay for a second hand one, you can find a big supply from companies from Honk Kong at very good prices. Additionally, they seem to be “New”. My question is: Do you trust them? Have you had some experience with these companies? Thanks for your comments,
Henry.
 

CGW

Member
Joined
Apr 19, 2010
Messages
2,896
Format
Medium Format
No idea where you are but the 758D wasn't generally offered in all markets--and likely never on the N. American market thru Sekonic's dealer channel. It lacks the trigger module of the pricier DR and that's where the fun starts. Nothing wrong with reputable HK dealers aside from warranty coverage and frequency calibration for the Pocket Wizard trigger module: nearly all are CE frequencies--not FCC--which means your Pocket Wizards and trigger module must match to work. Some claim they can be adjusted but the meters come CE or FCC specified--a concern if you have studio work in your future.

I looked hard at these late last year and decided to go for the almost identical but earlier 558--usually available used in nice shape for around $300+. The even earlier 508 is cheaper and more common but lacks a readout inside the spotmeter--something the 558 and 608 have. Unless you need the extensive calibration options of the 758D+DR, these earlier meters might be just what you need. Their 1 degree spot meters are accurate and well-integrated into the overall design.
 
OP
OP

Henry Alive

Subscriber
Joined
Aug 16, 2006
Messages
198
Format
Multi Format
Hi CGW:
You could be right, as I do not need more than a L558 meter. However, all of them are in ebay as second hand, and the L758 from Hong Kong are sold as “New”, and the price is very similar to the first one. The point is to be sure that these L758 from Hong Kong are really Sekonic and new.
Thanks,
Henry.
 

munz6869

Subscriber
Joined
May 17, 2004
Messages
1,303
Location
ɐıןɐɹʇsnɐ 'ɐıɹoʇɔıʌ
Format
Large Format
Hi Henry, I bought an L758D from a Honk Kong ebay dealer earlier in the year, and it's been fine - took it overseas with my Wista last month, and it was invaluable. Every exposure (that wasn't ruined for other operator-error reasons!!) was a perfect exposure. I did end up ordering a trigger module, but Australia uses the CE frequencies...

Marc!
 

Poisson Du Jour

Member
Joined
Jul 1, 2008
Messages
5,462
Location
.
Format
Digital
Like Marc's (above), my L758D also came from eBay 3 years ago, new, saving me about AUD$360.00 more at retail.

Availability of Sekonic meters varies considerably with markets e.g. southern hemisphere vs northern hemisphere, and eBay should be checked respectively for what's available. Mine came to me (in Australia) from DigitalRev Hong Kong, which has a very big and long-established reputation. There are others in Hong Kong and trust can only be assessed by 'having a go', purchasing something or looking at feedback.
 

CGW

Member
Joined
Apr 19, 2010
Messages
2,896
Format
Medium Format

As mentioned below, there are perfectly reputable HK dealers. Your only real concern would be warranty coverage since these are gray market items that Sekonic USA, UK, etc probably wouldn't service.
 
OP
OP

Henry Alive

Subscriber
Joined
Aug 16, 2006
Messages
198
Format
Multi Format
Thank you very much to all of you. It seems I can trust this suppliers.
Henry.
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,971
Location
U.K.
Format
35mm
The L-558 is no longer manufactured and not listed by Sekonic on their website. One thing to beware of if you buy from H.K not only do you get no warranty, but the official importers in your country have a record on their computers of the serial numbers of all the meters they have imported, and probably won't service it even if you pay them.
 

Poisson Du Jour

Member
Joined
Jul 1, 2008
Messages
5,462
Location
.
Format
Digital
If something goes wrong with your meter purchased from HK (under HK-local warranty), return it to HK for warranty by the store from which you bought it, it's that straightforward. It's not as if HK dealers are illicitly dealing with Sekonic et al. They are reputable, well run and well-sourced. Service if required is simple. In any case, scant few people would sniff out Sekonic's specific distributor for warranty or out of warranty service (as a professional I have had a gut-full of slow, incompetent distributors and dealers): it is a no-brainer to chase after the locals charged with looking after brands. Try this for out-of-warranty/ad hoc service: any pro-level camera dealer will recalibrate or repair a meter (among myriad other tasks) irrespective of who's name is on it or how parochial they are.
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,971
Location
U.K.
Format
35mm
andrewkirkby said:
Customs duty is only payable on goods over the value of $1000 AUD on date of arrival.
Click to expand...

Thanks Robert, I didn't know that, that's very good You did very well, I know that in Australia and New Zealand photographic equipment is very expensive.
 

Poisson Du Jour

Member
Joined
Jul 1, 2008
Messages
5,462
Location
.
Format
Digital
benjiboy said:
Thanks Robert, I didn't know that, that's very good You did very well, I know that in Australia and New Zealand photographic equipment is very expensive.
Click to expand...


It is? It only has 10% GST on it, where once there were two tiers of tax levelled, 22% and 32%. So for us oldies "looking back when", it's better now than it once was. And inflation is still low. And houses are not affordable any more. How's that for equality?

Many photographers are caught out, badly, when freight/insurance pushes the total above AUD$1,000 (after exchange) and Customs swoops. Yes, Customs takes careful note of freight charges: $20 over and you're snagged. Snix.
 

nick mulder

Member
Joined
May 15, 2005
Messages
1,212
Format
8x10 Format
Yup, I second going with the Honk (sic) Kong suppliers - never had an issue with ebay out of there after maybe 5 transactions with different sellers
 

andrewkirkby

Member
Joined
May 4, 2009
Messages
343
Location
Sydney, Aust
Format
Medium Format
Poisson du Jour:

Indeed, it is the Landed cost of the item.

Also, exchanges rates are a problem.

If it cost you $994 but arrives two weeks later and the value is now effectively $1003, you pay 10%

The best part about buying from the UK is the very reasonable shipping.
 

Poisson Du Jour

Member
Joined
Jul 1, 2008
Messages
5,462
Location
.
Format
Digital
$900+ is a trifle steep, sir. My L758D was bought for $450.00, meeting up with the eBay seller at Crown in Sin City (shadowed by two suited henchmen in dark glasses). Didn't speak a word of English and not a word needed to be exchanged subsequently.

I've since bought numerous other trinkets from that seller with nary a neg. word.
 

Poisson Du Jour

Member
Joined
Jul 1, 2008
Messages
5,462
Location
.
Format
Digital
Andrew, are you going to stock goodies e.g. meters, additional to film and specific supplies?
 

andrewkirkby

Member
Joined
May 4, 2009
Messages
343
Location
Sydney, Aust
Format
Medium Format
I think the initial investment is too high to stock meters. The buy price from the Australian distributor is higher than the online prices from overseas retailers. I will be stocking darkroom equipment. Thermometers, dev tanks, measuring cylinders etc.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…