Sand in my Karl Zeiss Planer Contax 50mm lens

PatrickStapleton · Nov 13, 2012

I was shooting on a beach the other day and it seems some sand grit has got into the focus ring of my Contax Y 50mm lens. I've tried blowing it out with an air compressor without success. My questions are:
- is this the right approach to remove the sand?
- if not is there another simple method that I can use to remove the grit?
- if not is there a person/dealer in Australia where I can send my lens to be cleaned?

Mustafa Umut Sarac · Nov 13, 2012

Its not a major accident. I think you would find a person from Australia , there was a worldwide famous Hasselblad repairman at Australia and I had been called him from Istanbul to get his idea on homemade Hasselblad Flexbody.
I think he is from Sydney. Let me search internet and turn back to you positive or negative in 20 minutes.

Umut
Istanbul

Mustafa Umut Sarac · Nov 13, 2012

I called that guy.

Eric Owen
Thornlands QLD
ph: 07 3821 6532
owenphotographicrepairs.com

I found another man,

Level 5 Shop 16a/428 George Street Sydney 2000

Phone number is: 9232 1225

Mustafa Umut Sarac · Nov 13, 2012

Dont play with the lens. Its Carl Zeiss Planar , one of the best lens you can buy and very expensive.

PatrickStapleton · Nov 13, 2012

Thanks for this info, I will follow up on both

John Koehrer · Nov 13, 2012

Removing sand from a helical is a royal PITA. The rings have to be separated, ALL grease and sand removed, not only from the helicals but from all internal surfaces, relubricated, reassembled and adjusted.

Like Mustafa says, have it done by a Pro.

benjiboy · Nov 14, 2012

Your first lesson is precision photographic equipment and beaches don't go together, I use an old 1950s folding camera on the beach that I wouldn't be too upset if it was ruined

Sand in my Karl Zeiss Planer Contax 50mm lens

PatrickStapleton

Mustafa Umut Sarac

Mustafa Umut Sarac

Mustafa Umut Sarac

PatrickStapleton

John Koehrer

benjiboy

Privacy & Transparency

Privacy & Transparency