Safelight for X-Ray Films

WPPD25 Self Portrait

A
WPPD25 Self Portrait

  • 5
  • 1
  • 32
Wife

A
Wife

  • 4
  • 1
  • 78
Dragon IV 10.jpg

A
Dragon IV 10.jpg

  • 4
  • 0
  • 80
DRAGON IV 08.jpg

A
DRAGON IV 08.jpg

  • 1
  • 0
  • 50

Recent Classifieds

Forum statistics

Threads
197,881
Messages
2,766,361
Members
99,495
Latest member
Brenva1A
Recent bookmarks
0

juan

Member
Joined
May 7, 2003
Messages
2,706
Location
St. Simons I
Format
Multi Format
I use a Kodak bullet safelight with a GBX-2 filter. Inside is a red LED I found at Lowes (a big box hardware store). I tested the bulb alone for 10-minutes and it fogged Fuji green x-Ray film. With the filter, there’s no fog.
 

koraks

Moderator
Moderator
Joined
Nov 29, 2018
Messages
21,423
Location
Europe
Format
Multi Format
Nice, this sort of information is always useful. Good point @juan on LED lighting; these bulbs open up new opportunities. Like you, I find that red LEDs need additional filtering to make them safe for paper & x-ray film (especially the latter).

LEDs bring new opportunities and also new challenges; it's now very easy to create relatively huge light intensities with a fairly narrow spectrum. I've been doing this for a few years in my darkroom, which makes it very convenient to work under safelight conditions. But even allegedly narrow-spectrum red LEDs do fog paper and ortho film at high intensities. I find rubylith to be a fairly good filter material; several layers can be stacked if needed. Testing is required, but doing so creates possibilities for much more pleasant working conditions than those warranted by the rather dim bulbs of the good old days.
 

JPD

Member
Joined
Mar 24, 2007
Messages
2,143
Location
Sweden
Format
Medium Format
Safest would be a LEAD bulb, but you wouldn't see anything.

I'll show myself out...
 

DWThomas

Subscriber
Joined
Jun 13, 2006
Messages
4,601
Location
SE Pennsylvania
Format
Multi Format
How many Lumens?
I use an E27-R8-G red bulb from SuperBright in a Kodak bullet housing. The claimed bulb output is 9 lumens. I also have a homemade ND filter of a couple of stops plus a Rubylith red filter I use. I won't claim to have done exhaustive testing but that bulb does definitely not work for the Fuji green film without a red filter.
 
Last edited:

Rick A

Subscriber
Joined
Mar 31, 2009
Messages
9,865
Location
Laurel Highlands
Format
8x10 Format
I have a decades old Premier 5x7 safe light with dark red filter and a 15 watt bulb, never have an issue with fogged ortho film or paper.
 

gone

Member
Joined
Jun 14, 2009
Messages
5,505
Location
gone
Format
Medium Format
I use the rubylith too. Easy to roll up for storage, layer, or use w/ a floor lamp. When I had fog issues w/ Foma papers, it was easy to double up the rubylith, and move the light further away from the papers.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom