Rolleicord Vb TLR with Xenar lens. Everything works well. Clean lens, focus is smooth, wind is smooth. Focus hood works well. I cleaned the shutter and reset timing. Cleaned wind system and focus system. Also aligned lens board, set focus. Lens cap included. Two things to point out-
The good: the focus screen in the camera was marked up beyond belief. So I installed a Brightscreen split screen ($100 value!
Repaired- I found a replacement cable release socket on another Roleicord parts camera so no longer bad.
$400 plus shipping ($16 US)
(I bought this camera on EBay because it had a Rolleiflex focus hood installed, with the drop down mirror for focusing when using the sports finder. Now this camera has an original Rolleicord Vb focus hood and I am selling it on after checking it out)
The good: the focus screen in the camera was marked up beyond belief. So I installed a Brightscreen split screen ($100 value!
Repaired- I found a replacement cable release socket on another Roleicord parts camera so no longer bad.
$400 plus shipping ($16 US)
(I bought this camera on EBay because it had a Rolleiflex focus hood installed, with the drop down mirror for focusing when using the sports finder. Now this camera has an original Rolleicord Vb focus hood and I am selling it on after checking it out)
Last edited: