rollei digibase and jobo cpe2

[wilfbiffherb]

ive jsut ordered a rollei digibase c41 kit to go with my jobo cpe2. i have just downlaoded the rollei instructions and note that there is no mention of water rinsing during development. this will be my first time home processing and i dont want to mess it up-has any used this kit that can offer any guidance?

 

[JLP]

An obvious mistake by Rollei.
You need to ad a wash after bleach and again after fixer, nothing between developer and bleach.
I run 4 wash cycles after bleach and again after Fix. About 2 minutes each.

 

[Paul Green]

Here is a huge thread discussing the kit it probably has the answers you need plus answers to questions you haven’t thought of yet (there was a url link here which no longer exists)

 

[wilfbiffherb]

thansk for the help guys. JLP, when you say wash cycle you mean you wash for 2 minutes each X4??

 

[JLP]

I wash a total of 2 minutes after Bleach = 4 30 second cycles and again after fix so a total of 2 minutes after bleach and again 2 minutes after fix. You could extend the last wash/rinse cycle after fix but don't know if it will improve anything.