ReraPan 100,400

rbguff

Member
Joined
Mar 20, 2019
Messages
65
Location
Köln,Germany
Format
35mm
Any help out there for development times for this ReraPan 127 b&w films, 1st timer, Im using Tmax developer 1+4 one shot at 20 degrees. Thanks
 
Last edited by a moderator:

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,182
Location
Delta, BC Canada
Format
Medium Format
Name of film corrected in thread title and body of post. Hope you find the information you need.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,314
Location
North Carolina
Format
Multi Format
You might have to find whatever times you can find, in whatever developer, and then cross-interpolate by looking what other similar (cubic grain of similar speed) films do inT-Max 1+4 compared to whatever developer you found times for, to get a starting point, and you may have to do a couple rolls to adjust your time. Once you find a good one, be sure to let Digitaltruth know so they can add it to the Massive Dev Chart to help others.

I'd probably start by looking at the times for FP4+ and Fomapan 100, or HP5+ and Fomapan 400 as "comparable" films. Kentmere 100 and 400 are also comparable.
 

pentaxuser

Member
Joined
May 9, 2005
Messages
19,998
Location
Daventry, No
Format
35mm
Here is the time for Rerapan 400 from the Massive Development Chart :
ReraPan 400 TMax Dev 1+4 7 mins at 20C. Nothing for 100 but as Donald says look for films at 100 in TMax developer and use that as a starting point

pentaxuser
 
OP
OP

rbguff

Member
Joined
Mar 20, 2019
Messages
65
Location
Köln,Germany
Format
35mm
Thanks for the edit, brain jam, I guess it must be the booster fault . Ok cool, I'll try the massive dev settings, and try the FP4 as well. Found out today that my jobo reels won't spool for 127, maybe need a Patterson tank for this, any suggestions
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…