Removing the timer lever on a Pentax Me Super

cmacd123

Subscriber
Joined
May 24, 2007
Messages
4,327
Location
Stittsville, Ontario
Format
35mm
which way does it turn? self timer screw on an ME is LEFT HANDED, not sure if it is the same on an ME super, but the ME super manual refers to seeing the older manaual for some steps.
 
OP
OP

fabulousrice

Member
Joined
Mar 19, 2020
Messages
449
Location
Los Angeles
Format
35mm
cmacd123 said:
which way does it turn? self timer screw on an ME is LEFT HANDED, not sure if it is the same on an ME super, but the ME super manual refers to seeing the older manaual for some steps.
Click to expand...

I tried counter-clockwise, is this what you suggest?
 

Nicholas Lindan

Advertiser
Advertiser
Joined
Sep 2, 2006
Messages
4,296
Location
Cleveland, Ohio
Format
Multi Format
Things that are made to turn to the left (counter clockwise) are sometimes fastened with screws with a left hand thread.

Try turning the screw clockwise to loosen it.

Back in the 60's I tried changing a tire on a Dodge. At the time the Chrysler corporation used left hand studs for the wheels on the left side of the car. I felt rather stupid with a broken off stud and nut in my hand. Then I noticed the 'L' stamped on the end of the stud. Then came enlightenment.
 

Mamiya_Repair

Advertiser
Joined
Feb 7, 2019
Messages
224
Location
Nevada
Format
Medium Format
The self timer screw on the ME Super is indeed a left hand thread so you would turn it clockwise to loosen. Attached is a photo of the factory tool for removing this part on the ME Super, you could make this tool out of a flathead screwdriver and a file or Dremel tool.
 

Attachments

  • pentaxtool.png
    109.4 KB · Views: 157

4season

Member
Joined
Jul 13, 2015
Messages
2,078
Format
Plastic Cameras
Yes, turn the screw clockwise to loosen. A tool similar to a rubber stopper is safest as it's very unlikely to scratch or elongate the holes. Japan Hobby Tool sells sets, but I imagine any number of improvised solutions would work.
 
OP
OP

fabulousrice

Member
Joined
Mar 19, 2020
Messages
449
Location
Los Angeles
Format
35mm

Wow that's cool that you have a photo of the tool! I use a spanner wrench like I said, and it was quite difficult already for me to obtain (I knew what I needed... but I had no idea what it was called!).
Also thanks for the recommendation - a clockwise spin it was!

I'm happy with the result - these are covers from Cameraleather (I think? Or someone in Japan whose contacts I've lost).
The back plate was the hardest since there was no way to remove the film type cardboard holder window thingie. I think it's decent, the point is to use the camera not display it in a museum
 

cmacd123

Subscriber
Joined
May 24, 2007
Messages
4,327
Location
Stittsville, Ontario
Format
35mm
I just wish that someone would start selling kits of those special tools. hard to use a dremel to that level of Precision.
 
OP
OP

fabulousrice

Member
Joined
Mar 19, 2020
Messages
449
Location
Los Angeles
Format
35mm
cmacd123 said:
I just wish that someone would start selling kits of those special tools. hard to use a dremel to that level of Precision.
Click to expand...

Agreed. Another issue is that the Dremel would spin at 5000 turns a second while this needs 6-7 precise turns... Quality not quantity!
 

cmacd123

Subscriber
Joined
May 24, 2007
Messages
4,327
Location
Stittsville, Ontario
Format
35mm
fabulousrice said:
Agreed. Another issue is that the Dremel would spin at 5000 turns a second while this needs 6-7 precise turns... Quality not quantity!
Click to expand...
I was thinking more of the suggestion to use a dremel to mutilate a screwdriver into a tool to fit that Retainer screw. (pentax part
23900-A122)
 

Nicholas Lindan

Advertiser
Advertiser
Joined
Sep 2, 2006
Messages
4,296
Location
Cleveland, Ohio
Format
Multi Format
You use the dremel to remove the head of the screw. Then you drill the remains of the screw out of the hole. Tap the hole for a new size in a left-hand Whitworth thread. Fabricate a new screw on a lathe. Plate the screw with chrome over nickel. Triumphantly put the lever back with the new screw. And film the whole process and put it up on YouTube.
 
OP
OP

fabulousrice

Member
Joined
Mar 19, 2020
Messages
449
Location
Los Angeles
Format
35mm
cmacd123 said:
I was thinking more of the suggestion to use a dremel to mutilate a screwdriver into a tool to fit that Retainer screw. (pentax part
23900-A122)
Click to expand...

Oh ok lol I didn't understand that was the suggestion


All that to get 500 views over 10 years? Haha

monopix said:
Those are from Aki-Asahi in Japan
Click to expand...

Thank you! I might order more from them...
 

Nicholas Lindan

Advertiser
Advertiser
Joined
Sep 2, 2006
Messages
4,296
Location
Cleveland, Ohio
Format
Multi Format
fabulousrice said:
All that to get 500 views over 10 years? Haha
Click to expand...

HaHa indeed:

https://www.youtube.com/user/erzzi6/videos
https://www.youtube.com/channel/UC4DrRcQ8e7I4544juTmgkZg
https://www.youtube.com/channel/UCIGEtjevANE0Nqain3EqNSg/videos
https://www.youtube.com/channel/UCFNc6JujTtkIyuZskIeNEGg/videos

It's a million subscriber big business. What's missing here is a new channel "Unnecessarily Complicated Camera Repairs."

We already have "Unnecessarily Pedantic Camera Repairs": https://www.youtube.com/user/mikeno62
 
OP
OP

fabulousrice

Member
Joined
Mar 19, 2020
Messages
449
Location
Los Angeles
Format
35mm


Don't get me wrong, I love restoration videos, but for all the work these people are putting, and all the chemicals they expose themselves to (and all the types of dust getting in their lungs), not a single one has reached a million views (youtube pays views, not subscribers... I myself have over 300 subscriptions, but since I never go on youtube...).
Someone in my family was getting around a million views per video they were posting, less than 10 years ago - all that without exposing themselves to cancer-inducing chemicals all they did was share impressions and jokes about school or video games.

Long story short, my hobby's photography, and making simple repairs - everyone wants subscribers and youtube views but it's really not my thing.
 
You must log in or register to reply here.
Menu
Log in
Register