Removing old camera leather

Rose still life

D
Rose still life

  • 1
  • 0
  • 11
Sombra

A
Sombra

  • 3
  • 0
  • 83
The Gap

H
The Gap

  • 5
  • 2
  • 96

Forum statistics

Threads
199,014
Messages
2,784,619
Members
99,771
Latest member
treeshaveeyes
Recent bookmarks
0

spoolman

Subscriber
Joined
Sep 7, 2007
Messages
661
Location
Toronto Onta
Format
Med. Format Pan
I just rescued a #4 Cartridge Kodak that had been badly abused over the years and I am considering restoring it.Is there a method of removing the old black leather covering without causing damage to the wood body?.

Doug:smile:
 

pgomena

Member
Joined
Jun 25, 2003
Messages
1,391
Location
Portland, Or
That's a tough one. I asked the same question a while back about removing ancient, dried-out tape from antique film holders. I ended up using mostly elbow grease and a putty knife. Solvents of any kind did little good. I didn't want to use water-based solvents for fear of warping the thin strips of wood, but that's what I ended up using. The tape seems to have had a protein-based glue on it. What worked best was a water-based label remover I found at Home Depot. Something like a wallpaper stripper that has some enzymatic action might work, but those are water-based too. Once you get a corner of the leather up, you might find it will peel right off if it's not too brittle.

Peter Gomena
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom