Refixing and rewashing negatives that are a year old

daggerlee

Member

Joined

Sep 13, 2005

Messages

32

Format

35mm

• Aug 13, 2011

• #1

Hi all,

Going through my archives I found about ten rolls of 35mm from a year ago that have a yellowish cast to them. This was early on in my film processing career when I didn't understand too much about fixer life and I think I may have fixed them using exhausted fixer. The negatives aren't cloudy but just have a yellowish cast to them, quite different than the usual grey or greyish-purple cast my negatives usually have.

I was thinking about carefully loading them onto reels and re-fixing and re-washing them. Any tips? Should I presoak first? Do you think it's necessary?

 

tkamiya

Member

Joined

Oct 3, 2009

Messages

4,284

Location

Central Flor

Format

Multi Format

• Aug 13, 2011

• #2

Typically, once the film is stained, there isn't all that much you can do.

You could take an unimportant part of the film, try refixing it, rewashing it, and see what happens. What do you have to lose? Not much...

 

OP

OP

daggerlee

Member

Joined

Sep 13, 2005

Messages

32

Format

35mm

• Aug 13, 2011

• #3

Thanks for the advice. I just cut off a clear strip and refixed it and it did get rid of the yellowness. However after soaking in water for ten minutes some clear 'gummy' substance started coming off, which is probably the emulsion or gelatin? I think I'll run another test and see what happens if I allow it to dry without any kind of rough handling to see if that happens again or if the negative stays stable.

 

OP

OP

daggerlee

Member

Joined

Sep 13, 2005

Messages

32

Format

35mm

• Aug 15, 2011

• #4

I just did an entire roll - it went okay. The yellowness went away. Have to be careful in handling them after the wash. Some strips started bubbling in the clear areas and the gelatin was relatively fragile. After it dried everything is okay.

 

wblynch

Member

Joined

Feb 9, 2009

Messages

1,697

Location

Mission Viejo

Format

127 Format

• Aug 15, 2011

• #5

Keep the temperature down to 68~70* F.

I had a friend back in the day who thought washing his film with hot water would get it cleaner and faster.

When he pulled the negatives from the reel, the emulsion slid right off the base in a big goopy glob.

 

OP

OP

daggerlee

Member

Joined

Sep 13, 2005

Messages

32

Format

35mm

• Aug 15, 2011

• #6

Thanks for the tip. I did 5 rolls today, the wash water was a little warm and some of the clear parts did bubble. It was mostly the Fuji Neopan, the Kodak Tri-X was fine. Still have 5 rolls left to do, some of which is Ilford Delta 3200, will see how well that turns out. The yellow staining was completely washed out btw.