Now got FTn's and FT2's coming out of my ears. Won another KEH grab box, containing six Nikkormat bodies. Four FTn's, two FT2's. Also, a MD-4 motor drive, which I have no use for, and a 28/2.5 Tamron Adaptall-2. Ralph, I suspect you'll be getting the Tammy, since I don't need it. Will be parting out one FTn to provide cosmetic pieces for the FTn that's already here (a $20 body from Glazer's Camera in Seattle that supposedly had a dead meter, but actually had a weak battery), then keeping one FTn and one FT2. The rest may wind up being parted out for spares, or, if they turn out to be decently working, passed onto others.
Nikon F-wise, I've added a few items from the late Pete Smith's collection. Decent looking and working F-36 with cordless pack to replace the one that Ralph now owns, which was rather well-used; 28/3.5 Nikkor-H with a small fungus splotch and a factory AI ring; chrome eyelevel F finder that will eventually need a new prism, since the one installed is a bit chipped and has a line of separation in it; and a BC-7 flash unit with box and case. Ralph got his power connector for his drive, another F Photomic T body, and a type III Nikon F clip-on selenium meter that's active, but needs calibration.
I've also passed a couple F2 bodies to him over the past couple months. Both chrome. One is an F2SB that needs a meter overhaul and the slow speeds worked on, the other, an F2 Photomic that came with a DP-12 that I snagged for one of my F2AS bodies. Handed him that with a 50/2 Nikkor-H that I de-AI'd, since I was on the lookout for a Nippon Kogaku version. Happened to have a pre-AI ring, so pulled the AI conversion ring and turned it back into a pre-AI lens.