jmcd
Member
- Joined
- Sep 10, 2002
- Messages
- 710
I have a Pro SD body that I suspect might have a mirror problem. With the focusing hood and screen removed, the mirror when raised makes contact on the left side bumper strip (when viewed from the operator's position). The right side of the mirror is visibly lower in relation to the platform that holds the focusing screen, by a good 1/16". This holds true at the mirror's hinge side, as well.
With the mirror in the lowered position, however, the pins on the back of the mirror both appear to contact the stop pins in the side of the problem.
So, I am wondering if my mirror alignment might be out, or if this is possibly normal for the RB67.
If it sounds like something is misaligned, can anyone recommend a good RB67 repair technician?
Thanks.
With the mirror in the lowered position, however, the pins on the back of the mirror both appear to contact the stop pins in the side of the problem.
So, I am wondering if my mirror alignment might be out, or if this is possibly normal for the RB67.
If it sounds like something is misaligned, can anyone recommend a good RB67 repair technician?
Thanks.