leicarfcam Member Joined Oct 10, 2006 Messages 346 Location Fort Worth, Format Multi Format May 16, 2015 #1 Anybody know where I can get one of these hood retaining screws for the RB67?
paul ron Member Joined Jan 22, 2004 Messages 2,709 Location NYC Format Medium Format May 18, 2015 #2 You can replace it with any similar screw... Its the head height you'll be concerned with. If using a regular screw, just put a dab of locktite to kerp ot from working lose. Ill look on my junk n see if i have a spare.
You can replace it with any similar screw... Its the head height you'll be concerned with. If using a regular screw, just put a dab of locktite to kerp ot from working lose. Ill look on my junk n see if i have a spare.
OP OP leicarfcam Member Joined Oct 10, 2006 Messages 346 Location Fort Worth, Format Multi Format May 18, 2015 #3 Thanks but another member is sending me a replacement..
paul ron Member Joined Jan 22, 2004 Messages 2,709 Location NYC Format Medium Format May 18, 2015 #4 Oh good. You should have mentioned it to close the thread.