• Welcome to Photrio!
    Registration is fast and free. Join today to unlock search, see fewer ads, and access all forum features.
    Click here to sign up

Question Time: water holding bath?

Recent Classifieds

Forum statistics

Threads
201,724
Messages
2,829,136
Members
100,915
Latest member
WyattRad
Recent bookmarks
0

Captain_joe6

Member
Joined
Mar 3, 2007
Messages
195
Location
Portland, OR
Format
8x10 Format
Hey all, I've got a question to throw out. Here goes:

I develop my large format film in trays and by inspection. I'm not looking to change that, it works for me. What I've been wondering lately is if it would adversely affect any of my negatives if I were to place them in a tray of water, slosh them about a bit, inspect them, and then place any stragglers back in the developer for a second go.

I ask because I noticed once that after a water rinse it was much easier to see through the negative when I was inspecting them rather than checking them right out of the developer when they are quite cloudy (and I know I'm looking through the base side of the film). Could this lead to an easier time checking my development?

Discuss. Thank you.
 
OP
OP

Captain_joe6

Member
Joined
Mar 3, 2007
Messages
195
Location
Portland, OR
Format
8x10 Format
So that covers whether i can put the film in a water bath and then inspect it, but the question still remains: could I put it back in the developer if I wanted to without experiencing adverse effects?
 

bdial

Subscriber
Joined
Jan 2, 2005
Messages
7,514
Location
North East U.S.
Format
Multi Format
No reason not to as long as it's just water. You would probably want to agitate well when going back into the developer to make sure any water carry-over is mixed in well with the developer. Using a very active developer might be a problem, but at the point you'd be doing this the neg is probably pretty close to done, so I'd think any potential even-ness problems would be minimal.
Finally, you may not want to re-use the developer, since you're slowly diluting it, albeit minimally. OTH, since you develop by inspection, it probably doesn't matter.
 

Kirk Keyes

Member
Allowing Ads
Joined
Jun 17, 2004
Messages
3,234
Location
Portland, OR
Format
4x5 Format
I see no issue. It's just like using a water presoak when beginning your development, except it's in the middle of the run. Of course, time in the water bath will give a little compensating development, but if you are agitating it an the time is not long, there should be little effect from that as well.
 
OP
OP

Captain_joe6

Member
Joined
Mar 3, 2007
Messages
195
Location
Portland, OR
Format
8x10 Format
Well awesome. I knew you all were good for something!
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom