Question on Hasselblad tele tessar 500 lens

[eli griggs]

Quick question on this lens; is there supposed to be an optic element or group behind the rear of the shutter?

Cheers

 

[Besk]

According to Zeiss' website it appears that there are two elements behind the shutter.

 

[David R Williams]

According to Zeiss' website it appears that there are two elements behind the shutter.

Yup:

https://www.zeiss.com/content/dam/consumer-products/downloads/historical-products/photography/hasselblad-c/en/datasheet-zeiss-tele-tessar-8500-en.pdf

 

[Sirius Glass]

Working on the shutter requires that all the lenses be removed and then reassembled and collimated. Not cheap. It cost me nothing since I bought it from KEH.

 

[Axelwik]

Just looked at mine, and yes there is glass just behind the shutter.

 

[eli griggs]

Working on the shutter requires that all the lenses be removed and then reassembled and collimated. Not cheap. It cost me nothing since I bought it from KEH.

Fortunately, the shutter is in great shape, as the entire lens and rear parts I have, are.

I'll post pics later to this thread.

 

[eli griggs]

Just looked at mine, and yes there is glass just behind the shutter.

Cheers.

Is there any chance for a few phone pics of your lenses back area?

 

[eli griggs]

Yup:

https://www.zeiss.com/content/dam/consumer-products/downloads/historical-products/photography/hasselblad-c/en/datasheet-zeiss-tele-tessar-8500-en.pdf

Thanks for the link.

I already have this pamphlet/publication "schematic".

 

[Axelwik]

Cheers.

Is there any chance for a few phone pics of your lenses back area?

500 by Marco Wikstrom, on Flickr

 

[eli griggs]

This photo is very helpful, as of a little bit ago, I used a point light from my cell phone to look directly down the back tube, only to see discover that, what a multi-LED Lume Panel did no reveal to my eyes, the single point made clear.

I DO have a glass element in the same position of your lens (or group?) and seem to only be missing the long cocking lever to the shutter and the back mounting plate.

I do have a parts plate & screws from another lens I can use, as they appear to be universal and a brass or mild steel flat rod is a simple enough thing to make, if I have the correct dimensions, which I hope some will share.


If anyone else has info/tips/schematics to share or inexpensive parts, I will welcome one or both greatly.

Cheers to all