Pt/Pd Restrainers - Alternatives to Potassium Oxalate

Ian Leake

Subscriber
Joined
Mar 25, 2005
Messages
1,630
Location
Switzerland
Format
Analog
It seems that the UK has effectively banned potassium dichromate for private use (under it's implementation of the EU REACH directive). Does anyone know of any alternative restrainers other than potassium chlorate and NA2? I'd rather give up platinum printing than return to potassium chlorate, and NA2 only works with palladium.

Thanks in advance.
 
OP
OP

Ian Leake

Subscriber
Joined
Mar 25, 2005
Messages
1,630
Location
Switzerland
Format
Analog
TheFlyingCamera said:
You could start doing Ziatypes, which allow a wide range of contrast control agents from gold chloride to sodium tungstate, and they'll give you more of a platinum color to begin with.
Click to expand...

Thanks Scott. Isn't this a palladium-only process? I'm keen to keep printing platinotypes not palladiotypes (a personal preference). If I'm forced to switch process then I'll most likely switch to the Malde/Ware process because it works with platinum. That said, I'd rather not change process because this will change the tonal relationships for all my existing negatives :-(
 

Jim Noel

Member
Joined
Mar 6, 2005
Messages
2,261
Format
Large Format

Hydrogen peroxide from the drug store. In the US that is a 3% solution. Dilute this 1+1 with water and i generally add 1 drop to the sensitizer for an 8x10 print. For small prints, dilute it more. The peroxide needs to be prepared immediately prior to each session because it loses the extra oxygen atom rather quickly. When you buy peroxide, check the expiration date to assure the freshness.

I have used this for several years rather than dichromate.

Jim
 

M Stat

Member
Joined
Oct 29, 2010
Messages
110
Location
Columbia Riv
Format
8x10 Format
I do exactly the same procedure as Jim does. A 3% solution of H2O2 diluted 1:1 with distilled water for an 8x10 print.
 

M Stat

Member
Joined
Oct 29, 2010
Messages
110
Location
Columbia Riv
Format
8x10 Format
Just like any oxidizer, if too much is used it can create a grainy effect. If you want to achieve more contrast, I suggest using the sodium platinum solution (available at Bostick & Sullivan, Santa Fe, NM) rather than the potassium platinum. In my work, I use palladium predominately, and use the platinum as the contrast agent, the 1 1/2% H2O2 is to keep the print free from chemical fog, which is what will happen if no restrainer is used at all. Some of my prints are pure palladium, and if you ever want to experience the true beauty of this medium, pure palladium is absolutely exquisite.
 
OP
OP

Ian Leake

Subscriber
Joined
Mar 25, 2005
Messages
1,630
Location
Switzerland
Format
Analog
Thanks, I'll experiment a bit with this.

And yes pure palladium prints can be exquisite, but more usually they are too brown and heavy for my taste. I've settled on an 85-90% platinum / 10-15% palladium coating with potassium oxalate and potassium dichromate. This gives a beautiful, delicate, warm-black with nice clean highlights and good shadows. I've spent a few years getting this process optimised, and I have no desire to lose it. I use pure palladium mostly for teaching or when I want to smother the shadow details.
 

Vaughn

Subscriber
Joined
Dec 13, 2006
Messages
10,106
Location
Humboldt Co.
Format
Large Format
The route I have taken is to make negatives that need no contrast agent (I am using a pd to pt ratio of about 3:1 ). Of course this does not help if one has older negatives with varying contrast.

I do occasionally use some older roll film negs that need a contrast bump, so I use pd plus NA2 for those, and get a similar color and feel as my larger prints.
 

Loris Medici

Member
Joined
Sep 13, 2005
Messages
1,154
Location
Istanbul, Tu
Format
Multi Format
Ian, pop Pd (Ware-Malde or Ziatype) can give you dead neutral or even cold toned prints - you can get warm toned and split toned prints too. See this print for instance, it's a pure Pd Ziatype print. It's a simple process (doesn't need any kind of developer, just a citric acid first bath + a good rinse - some papers need EDTA+sulfite clearing bath though...) and works very nice. It's good to have control over the hue. Just try it, maybe you'll like it a lot.

Regards,
Loris.
 

cliveh

Subscriber
Joined
Oct 9, 2010
Messages
7,548
Format
35mm RF
How about 5-methyl benzotriazole nitrate?
 
Last edited by a moderator:
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…