For Sale Prontor-SVS shutter for Messa-Baldix with f2.9 lens

Fully operational Prontor-SVS shutter, this is non standard and while at first glance #0 fit (front cell) it's a non standard thread and the rear cell thread is between #0 & #00 approx 24mm diam, shutter release is on the rear of the shutter.

£20/$32 plus postage/shipping at cost.

Ian Grant said:

Fully operational Prontor-SVS shutter, this is non standard and while at first glance #0 fit (front cell) it's a non standard thread and the rear cell thread is between #0 & #00 approx 24mm diam, shutter release is on the rear of the shutter.

£20/$32 plus postage/shipping at cost.

Click to expand...

Hi Ian,
I have just restored an early Flexaret IV with a size O Prontor SVS shutter which has had the DA gears,spring and linkages removed, no doubt becaus ethey siezed up. Whilst it still works the DA does not of course and I would like to restore this finction if possible. The shutter you describe might be what I am looking for. I will attach a shot of the shutter to see if you think the parts are there that I need and will fit.
Cheers,
Tony.

Hi Tony,

I shouldstill have the shutter but I;ll need a day or so to go through all my shutters and work out which one we are talking about. Since 2012 I've bought quite a few shutters

Ian

No rush Ian - whenever you get round to it.
Thanks,
Tony.

Hello again Ian,
Just noticed your post for the SVS was 2012 but in the middle of some 2021 posts. Unobservent me! Nodoubt it will be long gone. However, is it possible you have another early SVS, non-linear, size 0 you would sell? I actually onlyneed the DA bits - geartrain, spring, levers and screws. Also it can need a clean up.
Regards,
Tony.

Hi Tony, I will look over the weekend.

Ian