Prontor Professional 1s Shutter Repair Guide

R..jpg

A
R..jpg

  • 2
  • 0
  • 22
WPPD25 Self Portrait

A
WPPD25 Self Portrait

  • 9
  • 1
  • 95
Wife

A
Wife

  • 5
  • 1
  • 114
Dragon IV 10.jpg

A
Dragon IV 10.jpg

  • 5
  • 0
  • 96
DRAGON IV 08.jpg

A
DRAGON IV 08.jpg

  • 1
  • 0
  • 64

Recent Classifieds

Forum statistics

Threads
197,890
Messages
2,766,483
Members
99,497
Latest member
Jünter
Recent bookmarks
0

maximgrew

Member
Joined
Oct 21, 2012
Messages
14
Location
Brighton, UK
Format
4x5 Format
I have Been franticly searching for some repair information for a prontor professional 1s shutter, as my only working shutter broke today, I am fairly certain the trigger has internally disconnected from the cocking mechanism and that it could potentially be an easy fix? however there appears to be no obvious method for dismantling the shutter so I can make the repair. I was wondering if any one new of such information before I start randomly taking out screws, apologies if i have missed a previous post on this subject, but I cant seem to find much information on the repair of these shutters

Its this type for reference (left) Link

Thanks Max
 
OP
OP
maximgrew

maximgrew

Member
Joined
Oct 21, 2012
Messages
14
Location
Brighton, UK
Format
4x5 Format
Thanks Bernard, I believe the internals may be similar so that helps :smile: unfortunately externally the shutters are very different so still not sure how to get into this shutter
 

Whiteymorange

Subscriber
Joined
Jul 27, 2004
Messages
2,387
Location
Southeastern CT
Format
Multi Format
From the picture, it appears that the locking ring around the actual opening can be loosened with lens pliers. That probably holds the entire from to the body of the shutter. I know that some Prontors, like the ones used on Polaroid 110A's, use a similar device.

Just guessing, though. Good luck.
 
OP
OP
maximgrew

maximgrew

Member
Joined
Oct 21, 2012
Messages
14
Location
Brighton, UK
Format
4x5 Format
Thanks (there was a url link here which no longer exists) you were correct, the locking ring removes the face plate and exposes a small part of the mechanism and I was able to fix the shutter

the problem for any future readers was that the part of the shutter that sticks out to accept the cable release had managed to spin 180 and a screw attached to its base was blocking the firing mechanism, by taking off the front plate I was able to rotate the cable release mount back to its proper position and now the shutter works perfectly

now back to shooting :smile:
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom