Processing 4x5 film?

Dave Starr · Feb 18, 2011

frobozz said:
Nikor monster stainless daylight tank with the cut-sheet film cage, for me! I've done a zillion rolls of 35mm and 120 film in the normal sized tanks, so this just puts me totally in my comfort zone of processing technique.

Duncan

I recently got one of those sheet film tanks & tried it for the first time a couple days ago. It loads easily & worked fine.

Saganich · Feb 18, 2011

I have a Unicolor drum and rotating base which worked quite well the few times I used it. Since I don't have the internal spacers I can only manage 2 sheets at one time. I'm sure with some clever tinkering I could make my own spacers but it is good to have them...and an extra gasket for the lid as well.

michaelbsc · Feb 18, 2011

dtheld said:
I highly recommend the processor made by Morgan O'Donnel (apug member, search
Mod_Photographic for the details and his website) or contact Morgan at morgan@modphotographic.co.uk.
He's a great guy that has come up with an excellent solution to the 4X5 developing problem.
Dave

This insert is really a pretty good solution provided you have a three reel Patterson tank. It is tough to beat for small volume processing. If you had hundreds to do it probably isn't the best solution. But I find that six sheets is about all I ever need at one session.

rjbuzzclick · Feb 18, 2011

Konical said:
Good Evening,

A follow-up to Reid's comment above: I have on occasion, put film in my Chromega drum but not processed it immediately. Even after a several-day interval, light leakage has never been a problem at all. I would not, however, deliberately leave a loaded drum in a sunny location for any extended period of time. I wonder if the Beseler drum light leakage could occur simply because the pouring spout is left facing upward toward any room light source(s); perhaps facing it downward would alleviate any problem.

Konical

That's exactly where it came from, but probably more from the light over my basement workbench rather than the window. In the future, if I load early, I'll place the drum on it's side and under a dark cloth. That should take care of it.

daleeman · Feb 18, 2011

HP Combi Tank guts (Film Holder) and some tupperware bins for dip and dunk, certainly cheaper than three HP Combi Tanks. This works for me.

Processing 4x5 film?

Dave Starr

Saganich

michaelbsc

rjbuzzclick

daleeman

Privacy & Transparency

Privacy & Transparency