problems with loading CopyJet

marko_trebusak · Oct 20, 2009

Hi,

I just started again working with digital negatives. When I first started, I found that to load Agfa's CopyJet material, I need to tape it to some sort of paper before loading to (at that time Epson 7600) printer, because othervise printer will not recognise the material and would just roll it through and report "no paper" afterwards. Now with Epson 2880, I just found that it'll not recognise the material as well!! So to my question: is there a trick how to load OHP material, or you folks tape it to support paper as well?

Cheers,
Marko

Davec101 · Oct 21, 2009

The problems i had with copyjet were that the OHP does not lay flat and as a a result the print head would catch the edge and cause all manner of printing problems. I switched to Revolution which was cheaper/holds more ink/less base fog and lays flat, you might want to try that as it loads easier.

marko_trebusak said:
Hi,

I just started again working with digital negatives. When I first started, I found that to load Agfa's CopyJet material, I need to tape it to some sort of paper before loading to (at that time Epson 7600) printer, because othervise printer will not recognise the material and would just roll it through and report "no paper" afterwards. Now with Epson 2880, I just found that it'll not recognise the material as well!! So to my question: is there a trick how to load OHP material, or you folks tape it to support paper as well?

Cheers,
Marko

problems with loading CopyJet

marko_trebusak

Davec101

Privacy & Transparency

Privacy & Transparency