Hi,
couple of days ago I was shooting with my Mamiya RZ67 with the prism and 180 4.5 when it suddenly stopped shooting and instead the red light turned on, after putting on and removing the dark slide ( the back as well ) it finally shooted !
last night i decided to shoot again to finish the roll and check the camera, when the problem happened again. so to solve it i used a cable release on lens.
summary ! : red light turned on and no shutter release.
this morning I was trying to see if it happens again when something new ( and so sad ! ) happened.
the cocking lever stuck ( just like when you start a new film and at shot no.1 the lever gets stuck ) and it starts a beep
first I thought it should be a cog getting stuck but on emergency mode it works fine and when it's still stuck and i put it on emergency mode ( the beep stops ) and when i push the shutter release button i hear a click from inside the camera and everything gets back to normal till i cock the camera and release the shutter again
at last i found out that on normal mode the speed dial does not apply to the lens ( i think it just closes on 1/400 )
so I changed the lens and everything works totally fine so there can be probably a problem with my 110 2.8
sorry for long post but i wanted to give every detail possible and kind of confused.
thanks
couple of days ago I was shooting with my Mamiya RZ67 with the prism and 180 4.5 when it suddenly stopped shooting and instead the red light turned on, after putting on and removing the dark slide ( the back as well ) it finally shooted !
last night i decided to shoot again to finish the roll and check the camera, when the problem happened again. so to solve it i used a cable release on lens.
summary ! : red light turned on and no shutter release.
this morning I was trying to see if it happens again when something new ( and so sad ! ) happened.
the cocking lever stuck ( just like when you start a new film and at shot no.1 the lever gets stuck ) and it starts a beep
first I thought it should be a cog getting stuck but on emergency mode it works fine and when it's still stuck and i put it on emergency mode ( the beep stops ) and when i push the shutter release button i hear a click from inside the camera and everything gets back to normal till i cock the camera and release the shutter again
at last i found out that on normal mode the speed dial does not apply to the lens ( i think it just closes on 1/400 )
so I changed the lens and everything works totally fine so there can be probably a problem with my 110 2.8
sorry for long post but i wanted to give every detail possible and kind of confused.
thanks
