Prescysol and Ilford Delta 3200

[Lyn Arnold]

I have some exposed 120 Ilford Delta 3200, EI 1600. Has anyone out there tried Prescysol EF for development, and if so did you use the recommended partial stand protocol?

Lyn

 

[craigclu]

I used this combo on my limited test use of both materials.... I was shooting it at 1200 at a soccer game because it was overcast and I was also curious to try the combination. The sun broke through at the very end of the game. This was with a Pentax 67 and 200mm lens.

Dead Link Removed

I quickly looked at scans on my computer and remember this one for certain being with that combo. I used the semi-stand procedure. They printed easily to 8X10 with a nice, crisp look to them.

 

[Lyn Arnold]

I used this combo on my limited test use of both materials.... I was shooting it at 1200 at a soccer game because it was overcast and I was also curious to try the combination. The sun broke through at the very end of the game.

thanks Craig. Your image sure is sharp! I've read some posts of Pyrocat-hd with Delta 3200, and users have had good results. I'll give the Prescysol EF a try with one roll tomorrow

Lyn Arnold