The transparent ones were demonstration models meant to show how the cameras work.
I believe the fix for the transparency "issue" would be a can of spray paint. Even with an opaque case I don't think it'd work as the mechanisms in these don't cycle like a normal, working model. The camera is probably best used as a display piece.
You might try using it in rooms with no light. At least then you'd get a different image.
You might try using it in rooms with no light. At least then you'd get a different image.
if I could modify the transparent one to actually take photos..
First issue is film.
You could try and mount the camera inside a dark box with only an opening around the lens. Ensure no light can seep between the opening in the box and the camera lens. Then trigger the camera from within the box; you may be able to fashion something using a remote controlled wire release or something. Wait until the picture rolls out of the camera before opening the box.
A painful reality.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?