Polaroid Fim Question

[Tom C]

I have a Polaroid Land Film Holder #500 for a 4x5 view camera. I want to buy some 100/120 ASA film. Looks like Fuji has a good selection but can't tell for sure is their 3.25x4.25 B&W is correct for the 500 holder and 4x5 format.
Recommendations?

 

[Groundloop]

The Polaroid 500 holder only worked with single sheet Polaroid film which is no longer made. In fact, when I last had one in the mid 1990's, it was already a museum piece, and had long been replaced by the Polaroid 545 and later the 545i. I tried using the 500 holder with film available at the time, ruined the film, made a mess, and then bought a 545 holder. All the Fuji peel apart instant film is "pack film" (10 sheets per pack), so are absolutely not compatible with the 500 holder. If you're using a 4x5 camera and want to shoot instant film, unless you can find a cache of Polaroid film, your only options are a Fuji PA45 holder, which accepts the Fuji instant pack film in 4x5 size, or a Polaroid 405 holder which accepts the Fuji instant pack film in 3x4 size.

I know that The Impossible Project (Dead Link Removed) has resurrected many of the classic Polaroid films, but the price is high (to me), and their focus seems to be more on film for the integral cameras like the 600 series and the SX-70, so supplies of larger sizes might be sporadic at best.

 

[brucemuir]

The 500 would work with the discontinued sheets you just need to know how to do it and the info was readily available on the net.

I don't recall exactly but I have done it successfully.
I think it lacked a latch to hold something or another when pulling the DS or film sheet.

 

[Tom C]

Thanks for the input.

Would the 545i work with the newer Fuji Instant Pack Film (in 4x5)?

 

[removed account4]

hi tom

the 545, 545i, and 500 backs were not made for pack films, just
individual sheets of film - 52, 57, 55, 59 &c ...

http://en.wikipedia.org/wiki/Instant_film

if you scroll down, it looks like the 550 back ( polaroid ) might be helpful thought

good luck !
john

 

[TSSPro]

The 545i holder is still for single sheets. The only holder that I know of that will work with the Fuji pack film is the fuji PA45. I wish that there was a holder that would work for both :-(

 

[Tom C]

Does Fuji make single sheet films (as opposed to packs); and
will the Fuji PA45 slip under the ground glass on a Grahic View back?

 

[dking888]

The Polaroid 550 back will work with the Fuji 100C45 pack films.

Daniel King

 

[Tom C]

Thanks guys.