Hello Alll,
Do they still make Polaroid 89 film? I think it was a pack film like 669 but with a smaller finished image. My question also is the actual metal pack of the 669 the same size as the 89 film. I want to use 669 in the pack holder but not sure if it will fit. I do not have the camera to look at it is a possible purchase from another country and I don't think they will know the answer.
Hello Alll,
Do they still make Polaroid 89 film? I think it was a pack film like 669 but with a smaller finished image. My question also is the actual metal pack of the 669 the same size as the 89 film. I want to use 669 in the pack holder but not sure if it will fit. I do not have the camera to look at it is a possible purchase from another country and I don't think they will know the answer.
I'm no expert on this, and I can't answer your question regarding whether the metal packs are the same sizes, but I think 89 film is still being produced.
Check Dead Link Removed for example. They have 89 film with expiry in 2008. Sounds new enough to me... (And 669 is the one they *don't* have in stock. Don't know whether that means it is still being produced or not.)
Type 89, and the square holders, was a very short lived film choice from Polaroid. I still have a sales sheet and free tryout coupon from 2003 for this. If you find any, it will be old stock. There was little cost advantage, which I why I think it was not adopted by many photographers. Best to stick to 669, or 690, and the larger and more common holders.
Indeed, HerrBremerhaven, I stand corrected. There is still some 89 film around, but Polaroid stopped production of it in 2006, so whatever you find is old stock (though not necessarily past expiration). 669 is still in production. So it's back to your original question, FM2N: whether or not the holders are compatible. (Sorry, can't help you there...)
So you are saying that a film back that would hold 89 or 88 would hold 690 or 669 film pack but give me a square formated picture? If this is so great!!!
Thanks
Arthur
I've got an old Super Swinger (which takes type '80' film) which I've been meaning to dig out and see if I can use some Type 672 film in that I have for my Horseman polaroid back.
Bad news I'm afraid, the 80 film cassettes are about 20mm shorter than the 672 (which is the same format as 669), so the 66*/67* film packs will not fit a 8* camera.
It's not all bad news to me though, when I dug the camera out and opened the box I found a pile of the photos I took with it 30 odd years ago, as a nipper, that I thought were lost forever.