• Welcome to Photrio!
    Registration is fast and free. Join today to unlock search, see fewer ads, and access all forum features.
    Click here to sign up

Photomic F TN finder. Fungus or de-silvering

WILL WORK FOR FILM

Member
Allowing Ads
Joined
Oct 3, 2016
Messages
102
Location
Boise Idaho
Format
Medium Format
My new Nikon F TN is all cleaned up and being put through it's paces but there is a nagging issue that is concerning me. After carefully removing the handful of lint and debris from the focusing screen I have a clear viewfinder with the exception of what looks like either fungus or de-silvering. It is definitely inside the finder prism. Here is an image of what I am seeing.
 
I can live with it as long as it is only de-silvering. But if it turns out that I have a fungus problem, need to take care of it and separate it from my other equipment. The picture is deceiving. The right side is the reflection of the left side in the prism. While looking through the viewfinder I see it at the bottom left. I have avoided fungusy equipment till this point and am not really sure what it looks like. Would expect it to be sort of a spider web pattern if it was fungus. It looks to me more like a powdery residue.
 

There is fungus on the side that faces the focusing screen. This can't happen on the inside of the prism, because it is by definition a solid piece of glass.

As for desilvering, it is too common on Nikon F prisms. Just ignore the desilvering problem. I always wondered if Nikkormat prisms could be used as substitute!
 

So if I am understanding , you are of the belief that it is desilvering and NOT fungus? I can live with the desilvering.
 
I just found a tutorial online that explains how to disassemble the photomic heads. It explains that the foam spacers used would degrade and damage the prism over time. An image showing the rotten foam and the pattern it leaves matches the pattern in my viewfinder to some degree. I am now of the belief that it is in fact desilvering. I will just live with it. There is no way I will ever pay $300. + for a plain prism head. I don't think I will ever try to get the TN meter fixed either. I had every intention of using this camera completely manually to begin with. Just didn't like the idea of fungus spores in my equipment.

I do have another question in regards to the F's with the Photomic heads. As I have stated, I do not intend to use the meter. There will be no batteries in the camera. Most of my lenses, except Series E 100mm f2.8, have the rabbit ears to link to the metered head. So far I have coupled the rabbit ears and set the max aperature to the desired film speed. How does the lens communicate with the camera in a way that that max aperature/ISO setting matters? In other words, Does it really matter if I match up the aperature/ISO without a functioning meter? The Prism heads don't have the rabbit ear coupler. Do they have a different means of communicating ISO speed?
 
APUGuser19 said:
No, a Nikkormat prism will not work at all. Completely different configuration.
Click to expand...

Hi, many thanks for the reply. So it will not fit at all? Or will fit but without the meter PCB mounted on top?

I want to repair a desilvered photomic head and will be happy with it even if i remove the meter circuits.
 
APUGuser19 said:
No, a Nikkormat prism will not do. Once you open up both you would see why. Cannot be done no matter the intent.
Click to expand...

Thanks APUGuser19, you have saved me valuable hours of time !!
 
You must log in or register to reply here.
Menu
Log in
Register