The Canon EF is a beauty. How well have these stood up to the decades? The batteries were supposed to be mercury, but that is manageable.
That's really good progress Andreas. I need to go through my own progress and document it as well as you have. I've typically tried to document everything I do, but have been lazy lately. I've had a bunch of CLA's done for family members that are typically, just a lubrication, light seal replacement and a deep clean of a couple of decades of dust and grime. I just did the same thing to my very first camera last night. It is the A-1 that I bought sometime around 1979 while I was in high school.
I gave that camera to my son a couple of years back, so it was late to get a bit of maintenance done. While I have it for about a month, I'll run a few rolls of film through it just to enjoy that camera again. I've also done a CLA on a couple of Pentax SLRs.
With your focus on Minoltas, you would love digging through the broken camera bin at my local camera shop. Roberts Camera in Indianapolis has a bin with about 40 broken SLRs and rangefinders. $10 each and it seems about 1/3 of them are Minoltas. There are a couple Zenits, Practikas and a Nikkormat in there right now. I saw a Canon Q9 in there yesterday too.
For everyone who also likes to turn screws, here is an overview of the topics that I would like to report on in the near future.
If there are any special requests to shed more light on this or that, I would be happy to respond
For all of this, I collected more or less devices with issues for over a year in order to practice.
- Minolta X: Revival after electrolytic replacement - not every X makes it back. Causes and solutions. The Xs are sometimes vulnerable to problems with the shutter.
- Minolta Auto Winder D and G, Motor Drive MD-1: Make the gearbox work, repair corrosion damage, restore/replace the leatherette, analyze and resolve contact problems with the camera, explore the electronics.
- Minolta XG-M: Electrolytic capacitor check and replacement - probably every copy is affected by now.
- Minolta XD-7/XD-11: Investigation of the electronics/circuit, cleaning the pneumatic mirror shock absorber
- Minolta XE/XE-1/XE-7: Insights, investigating electronic issues.
- Canon AE-1 and AE-1 Program: The classics and their problems from A to Z. A model series where electronics and mechanics still work together in a balanced manner and, in particular, electronic processes can be understood because they are not that highly integrated.
- Canon T90: See previous reports. A solution for the non-functioning locking magnets (EEE, HELP) still needs to be found
- Canon EF (camera): The battery control LED should light up again at the push of a button.
- Canon Power Winder F for the F-1: Two examples with stiff gearboxes await cleaning and new lubrication. Insights into electronics in the 1970s.
- Nikon F3: Advance into mechanical depth, continue with the topic of LCD, insights into electronics.
- Nikon MD-4, the motor drive to the F3: Continuing the repair of battery acid damage - among other things. Replacing a corroded circuit board, maintenance work, fixing tired shutter buttons and mode dials. Possibly also revitalizing resinous gears (if I have a copy with this problem).
- Nikon F4: Expedition to the resinous aperture mechanism which prevents the small apertures from being formed.
- Nikon FG with MD-14: insights, function check, possibly service
- Nikon EM: A battered specimen awaits treatment.
- Nikon MD-E: The motor for the EM, here with corrosion in the battery compartment, probably more of it inside.
- Nikon MD-12: See report. A second specimen with an unknown defect is awaiting treatment.
- Tamron lenses: Service and repair. Tamron has always made great lenses.
- De-oiling of aperture blades, cleaning of cloudy lenses
- Miscellaneous: Whatever else comes from the contents of my repair box.
I have already written some reports on these topics previously, which I would like to publish in the coming weeks.
Work purely private, exclusively on my own inventory, no orders, no commercial interest, independent, driven only by my interests
Here is my vote. A fairly obvious and easy choice.I have looked through my list of projects and marked the projects that I have already worked on here in the forum as GREEN.
I would like to ask you what topics I should continue with. I am also happy to go into GREEN again or go into more detail.
Thanks for your feedback!Here is my vote. A fairly obvious and easy choice.
Canon AE-1 and AE-1 Program
Second choice:
Canon EF (camera)
A minor point, and I don't (yet??) have a black beauty, but this should be an easy repair for you.
Thank you for your structured and illustrated reports.
- Minolta X: Revival after electrolytic replacement - not every X makes it back. Causes and solutions. The Xs are sometimes vulnerable to problems with the shutter.
- Minolta Auto Winder D and G, Motor Drive MD-1: Make the gearbox work, repair corrosion damage, restore/replace the leatherette, analyze and resolve contact problems with the camera, explore the electronics.
- Minolta XG-M: Electrolytic capacitor check and replacement - probably every copy is affected by now.
- Minolta XD-7/XD-11: Investigation of the electronics/circuit, cleaning the pneumatic mirror shock absorber
- Minolta XE/XE-1/XE-7: Insights, investigating electronic issues.
- Canon AE-1 and AE-1 Program: The classics and their problems from A to Z. A model series where electronics and mechanics still work together in a balanced manner and, in particular, electronic processes can be understood because they are not that highly integrated.
- Canon T90: See previous reports. A solution for the non-functioning locking magnets (EEE, HELP) still needs to be found
- Canon EF (camera): The battery control LED should light up again at the push of a button.
- Canon Power Winder F for the F-1: Two examples with stiff gearboxes await cleaning and new lubrication. Insights into electronics in the 1970s.
- Nikon F3: Advance into mechanical depth, continue with the topic of LCD, insights into electronics.
- Nikon MD-4, the motor drive to the F3: Continuing the repair of battery acid damage - among other things. Replacing a corroded circuit board, maintenance work, fixing tired shutter buttons and mode dials. Possibly also revitalizing resinous gears (if I have a copy with this problem).
- Nikon F4: Expedition to the resinous aperture mechanism which prevents the small apertures from being formed.
- Nikon FG with MD-14: insights, function check, possibly service
- Nikon EM: A battered specimen awaits treatment.
- Nikon MD-E: The motor for the EM, here with corrosion in the battery compartment, probably more of it inside.
- Nikon MD-12: See report. A second specimen with an unknown defect is awaiting treatment.
- Tamron lenses: Service and repair. Tamron has always made great lenses.
- De-oiling of aperture blades, cleaning of cloudy lenses
- Miscellaneous: Whatever else comes from the contents of my repair box.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?