Pentax km or spotmatic?

LarryP

Member
Joined
Jul 17, 2011
Messages
157
Location
charleston s
Format
Multi Format
In the next few days I'll be in a position to replace my fed 5b with a slr. I had pretty much decided on a spotmatic for various reasons, but have noticed a KM at keh in the same price range. Spotmatics I'm familiar with and had a k1000 but never handled the KM. Just wondering if there are any real advantages to the km other than the mount?
 

Steve Smith

Member
Joined
May 3, 2006
Messages
9,109
Location
Ryde, Isle o
Format
Medium Format
I always suggest the KM to people looking for a K1000 as it is better featured and usually comes cheaper as it doesn't have the K1000's cult status.


Steve.
 

Ian Grant

Subscriber
Joined
Aug 2, 2004
Messages
23,253
Location
West Midland
Format
Multi Format
The K mount is an advantage as is Full aperture metering in all the K/M series, although the Spotmatic F offers this feature.

Last Sunday I could have bought some nice Spotmatics at £10 ($17) each, the original/SPII and SP1000 (budget) versions all fully functional, however I already have two sat idle, as well as a KM. MX, ME etc.

Really it's down to do you want the faster bayonet lens change compared to screw thread, many years ago I decided I did and didn't regret it. I was shooting a lot of rock concerts and the change helped enormously.

Ian
 

Rol_Lei Nut

Member
Joined
Jul 2, 2006
Messages
1,108
Location
Hamburg
Format
Multi Format
Advantages of the KM:
Bayonet mount - especially if you change lenses often, screw mount can be a PITA
Full-aperture metering - haven't used the KM enough to be sure it does much better, but the Spottie's stop-down metering is slooowww (the reaction time of the needle)
(Possibly also has a brighter viewfinder)

Advantages of the Spotmatic:
Can use all M42 lenses...
(yes the KM can too with an adapter, but it's a PITA).
 

Pumalite

Subscriber
Joined
Mar 12, 2009
Messages
1,078
Location
Here & Now
Format
Multi Format
Pentax KM hands down
 

BrianL

Member
Joined
Feb 17, 2010
Messages
538
Location
Toronto ON C
Format
Medium Format
I think it depends on the condition of the bodies. Go with the better. An advantage of the KM is it can take the M42, with an adaptor, and K mount. Advantage of the Spotmatic is it will probably outlast the KM because of the build, at a time when reliability was key, where robustness = reliability and, metal was king. I just bought an earlier S1a that does not even sport the meter, so no battery. The Spotmatic's meter is not mercury battery dependent as is so many older cameras so, that is not an issue.

If the bodies are close to being the same condition, then it comes down to body features. I've used M42 lenses on K mount cameras and I se no issue but I am used to using M42 lenses as my first slr was a Spotmatic. I bought it not long after they were coming back from overseas with a lot of returning service personnel. had a friend who bought a very complete kit, came home and needed the money to get married.
 

dehk

Member
Joined
Aug 4, 2010
Messages
881
Location
W Michigan
Format
Multi Format
Well, do you like M42 or K mount better? Also as said before the Spotmatic is solid, I'd choose that over the KM alone. But if you wanna go to town with Pentax, why not look up for a Pentax LX?
 

Ian Grant

Subscriber
Joined
Aug 2, 2004
Messages
23,253
Location
West Midland
Format
Multi Format
As Rol_Lei nut points out it is possible to use M42 lenses with an adapter to fit K mount cameras. Another option is to use Tamron Apdaptall II lenses and have monunts for both screw and K mount. I have 2 or 3 Tamron SP lenses with Adaptall mounts very useful particularly as I can use at a push on my EOS cameras as well.

Ian
 

Bill Burk

Subscriber
Joined
Feb 9, 2010
Messages
9,203
Format
4x5 Format
Since the Spotmatics aren't getting as many votes, I'll add one for the Spotmatic F.

I recently picked one up from a subscriber on this site and it performed. From the first roll through I made three prints and there is the potential for more. From my perspective, that is the true measure of a camera, the yield of print-worthy pictures.

The high speeds don't work due to lack of maintenance, but I believe inside the camera is like new (so I expect a CLA will restore it to new performance).

If you are already familiar with Spotmatics, then you will be able to use one immediately. I haven't handled any K-mount so I cannot offer a comparison. But Spotmatics are useful.
 

Paul Howell

Subscriber
Joined
Dec 23, 2004
Messages
9,595
Location
Scottsdale Az
Format
Multi Format
I bought my first Spot in 1966, used, it still works just fine. I take it out a couple of time a year and run a roll though it. But I think a KM is a better buy more features, will work with M42 lens with an adpator. There are lots of manual thrid party K mount lens which are good performers at bargin prices. K1000s are fine camera, just in my estimation overpriced.
 

Steve Smith

Member
Joined
May 3, 2006
Messages
9,109
Location
Ryde, Isle o
Format
Medium Format
Bill Burk said:
Since the Spotmatics aren't getting as many votes, I'll add one for the Spotmatic F.
Click to expand...

I will give it a vote too. I recently bought a very nice Spotmatic F locally for £20.

Just to be fair though, I will give the KM a vote too.


Steve.
 

Ian Grant

Subscriber
Joined
Aug 2, 2004
Messages
23,253
Location
West Midland
Format
Multi Format
I had a new Spotmatic F for my 21st birthday, a wonderful camera, eventually I sold it for a K mount camera in the early 80's. Possibly the best SLR I've ever used and I picked another one up donated to a comminity darkroom early 2000's (turned out it had belonged to a fellow MA student & friend).

My favourite K/M series Pentax though is the MX small light and mush quieter woderful camears to use.

Ian
 

eurekaiv

Member
Joined
Nov 2, 2011
Messages
248
Location
Santa Ana, CA
Format
Analog
I've never used a Pentax K mount other then an ME super (which was ok I guess) but I adore my Spotmatic SPII. It's just got this really pleasing feel to it—mechanical, sturdy, classic. It's also a very attractive design. If you're the type of SLR user that is fairly deliberate when picture taking, I wouldn't hesitate to recommend a Spotty. If you really aren't comfortable without ultra quick metering, a K mount (or Spotmatic F) is IMO a better bet.
 

John Koehrer

Subscriber
Joined
Apr 3, 2004
Messages
8,275
Location
Aurora, Il
Format
Multi Format
BrianL said:
The Spotmatic's meter is not mercury battery dependent as is so many older cameras so, that is not an issue.

They were in fact mercury based. there's no direct replacement, they'll be zinc-air with a shorter life.
Click to expand...
 

Rol_Lei Nut

Member
Joined
Jul 2, 2006
Messages
1,108
Location
Hamburg
Format
Multi Format
 

Tony-S

Member
Joined
Aug 16, 2009
Messages
1,136
Location
Colorado, USA
Format
Multi Format
 

Steve Smith

Member
Joined
May 3, 2006
Messages
9,109
Location
Ryde, Isle o
Format
Medium Format

Yes. Any camera with a bridge circuit (such as all the Spotmatics) will show correct exposure with the meter in the centre which is its resting place with no current flowing through it. With no current, the voltage is irrelevant.

Basically, any camera which shows correct exposure with the meter needle in the middle is insensitive to cell voltage. These cameras will also have the meter needle rest in the centre position with the power off.
Cameras which require you to set one indicator relative to the meter's needle position are usually dependent on the cell voltage for accuracy. With these cameras, the meter's needle rests at one end of its travel when switched off.


Steve.
 

Tony-S

Member
Joined
Aug 16, 2009
Messages
1,136
Location
Colorado, USA
Format
Multi Format
OK, I just came across this at Butkus :

Depending on the circuits in an exposure meter a constant voltage is actually necessary or not. A Pentax Spotmatic, for instance, has a ‘bridge’ measuring network and does not need an exact 1.35 volts. This camera works perfect on a 1.55 volts alkaline or 1.6 volts silver-oxide cell.

Is this true for ALL versions of the Spotmatic? If so, then all I need is a PX400 form factor 1.5V silver oxide battery?
 

Steve Smith

Member
Joined
May 3, 2006
Messages
9,109
Location
Ryde, Isle o
Format
Medium Format
Tony-S said:
Is this true for ALL versions of the Spotmatic? If so, then all I need is a PX400 form factor 1.5V silver oxide battery?
Click to expand...

Yes, all versions. Some people will tell you that it doesn't apply to the F but it does. Most Spotmatics have a standard Wheatstone bridge circuit. The confusion arises because the F has a different circuit where the meter has dual coils working out of phase. Current through one, controlled by the aperture, shutter speed and ISO setting, pushes the meter in one direction. Current through the second coil, controlled by the metering cell, pushes the needle the other way. Correct exposure is shown when the current through both coils is equal so there is zero net movement of the needle. If the supply voltage changes, the current through both coils changes proportionally which does not cause the needle to move to a different position.

http://pentax-manuals.com/manuals/service/spot_f_meter.pdf


Steve.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…