Hi all,
In an attempt to reduce the impact of an impending rangefinder purchase I'm offering my consumer 35mm components.
Pentax MG apeture priority only. c/w OEM manual motor drive and body cap. CLA'd 20-04-11 (reciept for $165 available. I know, I know but it seemed like such a good idea at the time...), body in good user condition (though obviuosly well used) winder battery cover has been repaired by glue and has a screw missing. Seems to work ok if you like the loud noise it makes. $50.
Pentax SMC-M 28mm F 2.8 c/w pentax caps and Hoya skylight 1B. Glass is good, some paint loss on the barrel. Filter has small marks. $60
Pentax SMC-A 50mm F2. c/w generic metal hood & cap. Pentax rear cap. Front element has 2 marks at the edge of the glass (may be coating seperation?). This was my favourite lens until I discovered MF. I've printed 12x16 from this and routinely printed crops at 8x10. In my opinion, it's a budget sleeper that gets overlooked by everyones focus on high speed. For this price I should keep it, but my intended purchase is so breath-takingly expensive (for me) that every little bit counts. $50
Pentax SMC-M 135mm F3.5. c/w caps and hard case. built in hood. hard case is a little battered. Lens is excellent. $60
Pentax K-49mm reverse adaptor for macro. c/w macro focussing rail. adaptor excellent, focussing rail is missing a rubber washer from the camera mount (I just used a peice of cardboard) but works well. As a cheap way of trying out macro this is a bit of fun, limited by your lens capablity of course. $30.
Postage extra at cost of course (from Brisbane Australia). I guess paypal or direct bank transfer. Or (easiest of all for me) pick-up from 4122 of course!
If someone would like to save me the effort of multiple postage etc and take the lot I'll pack it all into it's 5 liter storage bucket and take $200.00. If you take the lot and pick up I'll throw in a patterson daylight developing tank.
MattPC.
In an attempt to reduce the impact of an impending rangefinder purchase I'm offering my consumer 35mm components.
Pentax MG apeture priority only. c/w OEM manual motor drive and body cap. CLA'd 20-04-11 (reciept for $165 available. I know, I know but it seemed like such a good idea at the time...), body in good user condition (though obviuosly well used) winder battery cover has been repaired by glue and has a screw missing. Seems to work ok if you like the loud noise it makes. $50.
Pentax SMC-M 28mm F 2.8 c/w pentax caps and Hoya skylight 1B. Glass is good, some paint loss on the barrel. Filter has small marks. $60
Pentax SMC-A 50mm F2. c/w generic metal hood & cap. Pentax rear cap. Front element has 2 marks at the edge of the glass (may be coating seperation?). This was my favourite lens until I discovered MF. I've printed 12x16 from this and routinely printed crops at 8x10. In my opinion, it's a budget sleeper that gets overlooked by everyones focus on high speed. For this price I should keep it, but my intended purchase is so breath-takingly expensive (for me) that every little bit counts. $50
Pentax SMC-M 135mm F3.5. c/w caps and hard case. built in hood. hard case is a little battered. Lens is excellent. $60
Pentax K-49mm reverse adaptor for macro. c/w macro focussing rail. adaptor excellent, focussing rail is missing a rubber washer from the camera mount (I just used a peice of cardboard) but works well. As a cheap way of trying out macro this is a bit of fun, limited by your lens capablity of course. $30.
Postage extra at cost of course (from Brisbane Australia). I guess paypal or direct bank transfer. Or (easiest of all for me) pick-up from 4122 of course!
If someone would like to save me the effort of multiple postage etc and take the lot I'll pack it all into it's 5 liter storage bucket and take $200.00. If you take the lot and pick up I'll throw in a patterson daylight developing tank.
MattPC.
