Peak I (2000) Questions

calebarchie · May 23, 2020

Hi guys,

Would anybody happen to have dimensional drawings for this model or possibly tell me the OD of the eyepiece? Also is the eyepiece able to be disassembled or swapped?

Many thanks,
C

calebarchie · May 25, 2020

No peak users with a ruler than can chime in? Bit hard to fathom!

Pieter12 · May 25, 2020

Be patient. I will go to the darkroom and get you a measurement in a bit.

Pieter12 · May 25, 2020

Looks like 34.5 mm

Patrick Robert James · May 25, 2020

I have the Micromega Koana one if that is the same. And a pair of machinist calipers..... If Pieter12's answer isn't what you are looking for. Be specific.

Molli · May 25, 2020

(Please ignore evidence of my Peak's dark and sordid past!)

In the realms of [probably] too much information....
Is any of this of any help at all? All measurements are the diameter across to the outer edges in millimetres (Circumference = Multiply by pi ((pi = 3.14159))

calebarchie · May 26, 2020

Pieter12 said:
Looks like 34.5 mm

Thanks!

Patrick Robert James said:
I have the Micromega Koana one if that is the same. And a pair of machinist calipers..... If Pieter12's answer isn't what you are looking for. Be specific.

Was just after some nominal dimensions, looks it is a bit bigger than I was hoping so I will have to machine something up. Precision measurements would be nice, aside from the different branding there seems to be some minor variations of the eye piece namely the knurling style, and filter slot. The one without a slot has a slight lip on the edge.

Molli said:
(Please ignore evidence of my Peak's dark and sordid past!)

In the realms of [probably] too much information....
Is any of this of any help at all? All measurements are the diameter across to the outer edges in millimetres (Circumference = Multiply by pi ((pi = 3.14159))

View attachment 247017 View attachment 247018 View attachment 247019 View attachment 247020 View attachment 247021 View attachment 247022

I appreciate the images, this gives me confidence I can easily take it apart and make new parts if required. Looks like the lipped version, the one with the filter slot has no lip.

seall · May 26, 2020

Peak Vs Micromega knurling.

calebarchie · May 30, 2020

Here is a micromega version with a filter slot, the green is the OD dimension I require. Would I be correct in saying this is an earlier model with a slot and the newer ones appear to have a push on filter? Is the top lip portion rubberised - seems there is a small split line there..

Pieter12 · May 31, 2020

The 34.5mm measurement I gave the other day is for that part. It is metal and the slot is for the (of questionable value) blue filter. The photo is of a Model I (2000). Although there are Models II (2020) and III (2030), they have smaller mirrors. The Model I is the top of the line.
https://www.peakoptics.com/images/pdf/PeakFocuser.pdf

Peak I (2000) Questions

Privacy & Transparency

Privacy & Transparency