PaX M2 rangefinder cover removal??
-
A
- Thread starter DannL
- Start date
Recent Classifieds
-
For Sale Durst Laborator L 184 LACON Condensor set
- Started by jbrianfoto
-
For Sale Durst Laborator L 184 Lamphouse and Bulb Adjustment Mechanism
- Started by jbrianfoto
-
For Sale Durst Laborator L184 accessories; VADAP tilting Baseplate
- Started by jbrianfoto
-
Free Mini Radio triggers: Light pix lab Flash Q
- Started by RoboRepublic
-
Want to Buy Kodak Polytoner
- Started by Guillaume Zuili
Forum statistics
Got it. 
I never imagined that a camera could accumulate so many troubles. The aperture ring on the lens was frozen solid. The focus adjust was froze solid. The rangefinder was frozen, and the front lens element was installed backwards. The rewind knob was very difficult to turn. And finally the eyepiece elements and rangefinder mirrors were all fogged sumptin terrible. But now all is fine. A little elbow grease and gumption.
Have PaX - Will travel.
I never imagined that a camera could accumulate so many troubles. The aperture ring on the lens was frozen solid. The focus adjust was froze solid. The rangefinder was frozen, and the front lens element was installed backwards. The rewind knob was very difficult to turn. And finally the eyepiece elements and rangefinder mirrors were all fogged sumptin terrible. But now all is fine. A little elbow grease and gumption.
Have PaX - Will travel.
Last edited by a moderator:
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |