Painting Effect ULF Pinsieve Viewfinder and Engineering

Mustafa Umut Sarac

Member

Joined

Oct 29, 2006

Messages

4,829

Location

İstanbul

Format

35mm

• Jul 1, 2014

• #1

I want to view my photographic compositions with the view of a water color painting. Best technology to maximum effect is pin sieves. I went to sea side with a 50mm rangefinder and scene was so huge , there is no way to see it again at home taking minute precision 50 stitched photographs and it would be curved and ugly.

I can print a 70x105 pin sieve with image setter , put in front of box and at the back , there would be a matte plastic.

Pin sieve focuses the image 1 to 1 on to matte surface and voila , we have a painting effect.

How can I engineer it ?

Thank you for reading,

Umut






?

 

AgX

Member

Joined

Apr 5, 2007

Messages

29,973

Location

Germany

Format

Multi Format

• Jul 1, 2014

• #2

An array of bundled fiberglass perpendicular put on the paper and the image projected on the other fibers' end plane, being in focal plane.

 

OP

OP

Mustafa Umut Sarac

Member

Joined

Oct 29, 2006

Messages

4,829

Location

İstanbul

Format

35mm

• Jul 1, 2014

• #3

I think this is a good idea. Glass fibers comes in two variation , ome is rowing other one is chaotic distributed. Do you advise me to focus image on to glass fibers and other side would be paper and to be painted image at back of the paper. Chaotic fibers sold as 250 grams for square meters. Am I understanding you correctly , have it ever been tried ? Any example , painter ?

 

AgX

Member

Joined

Apr 5, 2007

Messages

29,973

Location

Germany

Format

Multi Format

• Jul 2, 2014

• #4

Exactly. If I remember right there even was such fiber plate. At least I have seen a photograph made that way. There also was such fiber optic employed in a Poloroid-back for SLRs, but of course with fibres so fine as not to distort.

 

OP

OP

Mustafa Umut Sarac

Member

Joined

Oct 29, 2006

Messages

4,829

Location

İstanbul

Format

35mm

• Jul 2, 2014

• #5

How the photograph looked like ? Please describe more. Fiberglass can be two things , epoxy or polyester impregnated and cured glass reinforced plastic plate and the only alone glass fibers. Whom you are talking about AgX ?

 

AgX

Member

Joined

Apr 5, 2007

Messages

29,973

Location

Germany

Format

Multi Format

• Jul 2, 2014

• #6

I'm thinking of a lightpiping effect wothout spill-over to the adjacent fibers. With a diameter large enough to yield a pointilistic effect on the print, as each fiber mixes all light entering it.