For Sale Packard Shutter, Front Mounted

[Reinhold]

This is a factory-new 3 inch #5 Packard Shutter on a thin, rigid plate with a Cokin style mount.
It's a complete, well built, lightweight, compact, and ready to use unit.
See the shutter in operation here:
http://www.youtube.com/watch?v=9uqQmzlRMRI

"Instant" mode is a quick squeeze and release (about 1/20 second).
A single continual squeeze holds the shutter open for about 90 seconds.
For times longer than about 2 minutes, a second squeeze & release closes the shutter.

• Fits any of my recent Wollaston lenses having a 72mm front thread.
• Fits ANY lens with a standard front filter thread and a commonly availabe Cokin P series ring such as: http://www.bhphotovideo.com/bnh/cont...A=endecaSearch
• To reduce exposure times down to 1/20, use a slower film, use contrast and/or neutral density filters.

The shutter, the mounting plate, and the bulb & rubber tube is $ 250 + shipping.
For Wollaston lens customers, a 72mm Cokin flange ring is also included.

Reinhold

www.Re-inventedPhotoEquip.com

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[Reinhold]

For those folks who want an "instant" mode, I offer the same configuration using a Packard #6 shutter for $279 + shipping.
Inserting a special pin into the shutter yields a 1/25th second exposure with a single squeeze of the bulb.
Removing the pin lets the shutter revert to the #5 mode (fully manual timing).
I use factory new shutters for total reliability.

Reinhold

 

[Reinhold]

Here's a quick peek on how I've configured the trip pin on a 3" number 6 Packard...

Reinhold