Online source for Canon Lens Replacement Parts?

Recent Classifieds

Forum statistics

Threads
199,077
Messages
2,785,905
Members
99,798
Latest member
jmarkus
Recent bookmarks
0

haring

Member
Joined
Feb 2, 2011
Messages
287
Format
35mm
The pin inside the Shift Knob of my Canon Tilt Shift lens got lost...Is there a way I can find a store online which sells replacement parts for Canon cameras?
I have the knob I just need the pin to put it back...
I have looked at ebay, etc and so far I couldn't find any stores which sells small replacement parts for camera lenses.

Thanks for the help!
 

John Koehrer

Subscriber
Joined
Apr 3, 2004
Messages
8,277
Location
Aurora, Il
Format
Multi Format
Never seen the lens, never stopped me before. :wink: Does it go through the knob and shaft at 90 degrees?
If it does, then a piece of brass rod from a hobby shop can provide it.
As far as a genuine replacement, unless you can find a source of no longer made bits, I'm afraid you may be out of luck.
Something like a camera repair shop may help but it's not going to be the guy down the street but someone who bought out Canon's old stock.
 

Leigh B

Member
Joined
Jan 17, 2011
Messages
2,059
Location
Maryland, USA
Format
Multi Format
Any info on the pin (diameter, length, material, finish)?

Is there any work on the pin (threads, knurls, splines)?

I can probably provide a suitable replacement (not an original Canon part) if it's not too exotic.

- Leigh
 
OP
OP
haring

haring

Member
Joined
Feb 2, 2011
Messages
287
Format
35mm
Never seen the lens, never stopped me before. :wink: Does it go through the knob and shaft at 90 degrees?
If it does, then a piece of brass rod from a hobby shop can provide it.
As far as a genuine replacement, unless you can find a source of no longer made bits, I'm afraid you may be out of luck.
Something like a camera repair shop may help but it's not going to be the guy down the street but someone who bought out Canon's old stock.

Finally, I have sent it to Canon to fix it. They were fast and charged me around $120 which wasn't bad...I guess. I can recommend them!
 
OP
OP
haring

haring

Member
Joined
Feb 2, 2011
Messages
287
Format
35mm
Any info on the pin (diameter, length, material, finish)?

Is there any work on the pin (threads, knurls, splines)?

I can probably provide a suitable replacement (not an original Canon part) if it's not too exotic.

- Leigh

I wish I had seen this earlier. I ended up sending it to Canon. They did a really good job!!! I will let you know next time when I need parts!
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom