Omega F w/colorhead

Rlibersky · Jul 12, 2005

Does anyone use a Omega F with the color head. I'm trying to get a good base for VC paper. It seems I have to be in the magenta 130 yellow 25 cyan 0 range to get a normal contrast print. This is not true with the Omega D2 with Ilford filters.

Do the internal filters fade? Or am I just needing to test for this specific enlarger? Would be nice not to have different ASA for the same film.

Moderators remove thread if it becomes to controversial.

Nick Zentena · Jul 12, 2005

The VC book put out by the guy that did the Darkroom cookbook includes a section on testing to figure out what grades you're getting.

Why not just use the M and leave out the Y? Unless you're looking for speed matching between grades you won't lose anything going with just one filter.

Rlibersky · Jul 13, 2005

I will give that a try this weekend.

Bob Carnie · Jul 14, 2005

Get rid of the yellow as Nick recommends and go higher on the magenta.
Also sometimes the dichroic filters do stick, take out the mixing box and turn on the enlarger, you will see the filters and how they operate, make sure the magenta is dialing in fully, I have had this problem in the past ,not sure how to fix it as I have 7 thumbs but there are tons of very good people on this site who could help you if this is indeed the problem

Nick Zentena · Jul 15, 2005

One thing. Difffusion enlargers are about 1/2 grade softer then condensor enlargers. If the negative was developed for condensor then you'd need a touch more contrast.

JackRosa · Jul 24, 2005

Omega F head w/VC paper

I use an Omega F head. The dichroic filters do fade - this is especially true of the magenta filter. I would get rid of the yellow filtration first and try just magenta filtration. 130M seems to be quite a high value to get a normal contrats print (from a normal contrast negative). My value ois closer to 15M.

Let me know if I can be of further help.

Ed Sukach · Jul 25, 2005

Will someone please check the Data Sheets for Ilford MultiGrade papers? They include dichroic filtration stating points for both single and dual color filtration for obtaining the different contrast grades. Starting points. I have calculated my own "double filtration" values , which differ significantly - and they work very well.

Rlibersky · Jul 25, 2005

JackRosa said:
I use an Omega F head. The dichroic filters do fade - this is especially true of the magenta filter. I would get rid of the yellow filtration first and try just magenta filtration. 130M seems to be quite a high value to get a normal contrats print (from a normal contrast negative). My value ois closer to 15M.

Let me know if I can be of further help.

Have you ever changed one of the filters? If so, How difficult is it?.

JackRosa · Jul 27, 2005

I personally have not. I have Focal Point (in FL) do it.

Rlibersky · Aug 18, 2005

I finally found a manual for this enlarger and was suprised to see the filter eq. they use. (see attachment). If this is correct then I maybe getting I am supposed to.

Jack if you would like a copy of this PM me. I can easily make a PDF of it.

I'm not fimiliar with Kodak filters, so I couldn't talk about them.

Randy

Rlibersky · Aug 18, 2005

Bump, I forgot the attachment.

Ronald Moravec · Aug 19, 2005

Negs that print on my D2 on 2 paper require about 30 magenta on the Chromega D.

Yellow is reducing contrast. Cyan is just reducing the light.

Omega F w/colorhead

Privacy & Transparency

Privacy & Transparency