Omega C760 and C760-XL columns...interchangeable?

Dhar

Member
Joined
Jan 9, 2007
Messages
22
Location
Novato, CA
Format
35mm
So after lurking around the forums and learning and starting to put together my own darkroom, it's time for me to ask my First Forum Question!

I've recently purchased a C760 dichro enlarger setup, and I'm wondering if it's possible to simply "swap in" the C760-XL column? I can't find anything on the web that indicates the XL is anything but "taller"...is it?

Thanks for the help on this, as well as on everything I've learned just by reading the forums!

-g.
 

Nick Zentena

Member
Joined
Nov 21, 2004
Messages
4,666
Location
Italia
Format
Multi Format
Do you just want to use the head on a different column? I think all the C heads fit all the C enlargers. Even fit the older B enlargers with an adapter.
 
OP
OP

Dhar

Member
Joined
Jan 9, 2007
Messages
22
Location
Novato, CA
Format
35mm
Nick Zentena said:
Do you just want to use the head on a different column? I think all the C heads fit all the C enlargers. Even fit the older B enlargers with an adapter.
Click to expand...

Depends on the definition of "head" -- the C760 (to my just-got-it understanding) is basically three parts: the column ("girder" in the manual, basically just a piece of extruded metal), the chassis ("carriage" in the manual...the part that actually moves up and down on the column), and the enlarger head (light source, lens, etc.). I want to change only the column by taking the carriage and head off the 760 column and putting them onto the 760-XL column. Does that make more sense?

-g.
 

Nick Zentena

Member
Joined
Nov 21, 2004
Messages
4,666
Location
Italia
Format
Multi Format
http://www.khbphotografix.com/omega/Discontinued/C760.htm

Looking at that it seems they sold the column,baseboard and carriage in one package. I guess it's possible that they changed something between the two columns but I'd be suprised.

Let me put it this way I would expect it to work just fine. Now will it?

From memory for the B66 you could do what you want. So I'd expect they didn't change that when they released the newer model.
 

John Koehrer

Subscriber
Joined
Apr 3, 2004
Messages
8,277
Location
Aurora, Il
Format
Multi Format
It's very likely that the head/carriage will fit either column. In practice though, it would more likely be less expensive just to obtain a different(XL) enlarger than a replacement column.
 

eunkefer

Member
Joined
Nov 27, 2006
Messages
31
Location
Potomac Fall
Format
Multi Format
Dug out my C760 Instruction Manual, it covers standard and XL models (I have the XL). Only reference made in manual sections about unpacking and assembling regarding the two versions is "Your basic package should contain: Girder (Standard or XL Model, as specified on the label)".
From the Shipping Check List the XL Girder part # is 9-303-2207-02.
Max Height for Standard 42" ,XL 50"

Regards
Ed
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…