EdColorado
Member
If you had both an ICA 146/1 9x12, and an Agfa Standard 9x12, which would you choose as a basis for conversion to a 6x17 panoramic camera?
I have recently acquired both in a large "package deal" but know very little about either.
My thought points are:
Which would be the better camera from a quality perspective for the conversion. Better build, better accuracy of the design. Both cameras are in about the same condition but which is the better box? The panoramic camera will have a different, modern LF lens in place so optics are not a concern. It will also be fitted with a 6x17 roll film back so its all down to the bellows and linkages, the woodwork, just the overall quality. They seem the same to me but??
I also want to use the non modified camera just as it is so which camera is the better overall camera as built, optics included? I do have some film holders that fit both so which would you prefer to have as a nice old original camera to use on occasion?
Are either if these worth too much money to be modifying them like this? The back section should just be done with adapters but I'm not yet sure how to fabricate the lens board setup. Ideally I will be able to return the camera to original but I'm not sure yet. I don't think either are worth much at all but again, I know next to nothing about them.
Is there anything you can think of that kills the whole deal? I don't see a reason it shouldn't work but I also haven't tried this before.
Thanks for any input,
Ed
I have recently acquired both in a large "package deal" but know very little about either.
My thought points are:
Which would be the better camera from a quality perspective for the conversion. Better build, better accuracy of the design. Both cameras are in about the same condition but which is the better box? The panoramic camera will have a different, modern LF lens in place so optics are not a concern. It will also be fitted with a 6x17 roll film back so its all down to the bellows and linkages, the woodwork, just the overall quality. They seem the same to me but??
I also want to use the non modified camera just as it is so which camera is the better overall camera as built, optics included? I do have some film holders that fit both so which would you prefer to have as a nice old original camera to use on occasion?
Are either if these worth too much money to be modifying them like this? The back section should just be done with adapters but I'm not yet sure how to fabricate the lens board setup. Ideally I will be able to return the camera to original but I'm not sure yet. I don't think either are worth much at all but again, I know next to nothing about them.
Is there anything you can think of that kills the whole deal? I don't see a reason it shouldn't work but I also haven't tried this before.
Thanks for any input,
Ed