NOVA slotprocessor leakage

BBonte · Feb 3, 2007

I have 2 NOVA slot processor monochrome for B W paper. One of them is leaking from the fixer slot. Used some epoxy provided by NOVA Darkroom without success. Sent it back to UK ? Other suggestions ?

Neal · Feb 3, 2007

Dear BBonte,

RTV Silicone is a nice all purpose sealer.

Neal Wydra

dancqu · Feb 3, 2007

BBonte said:
I have 2 NOVA slot processor monochrome for B W paper.
One of them is leaking from the fixer slot. Used some epoxy
provided by NOVA Darkroom without success.
Sent it back to UK ? Other suggestions ?

If it's crowded for space you are then try single tray
processing. I use more than usual dilution chemistry,
one-shot. Re-use or one-shot the method is similar
to rotory processing. You'll value seeing
the prints come up. Dan

BarryWilkinson · Feb 4, 2007

I would contact Nova again by telephone. They are usually very helpful and may be able to offer further advice.

Barry

Dave Miller · Feb 4, 2007

dancqu said:
If it's crowded for space you are then try single tray
processing. I use more than usual dilution chemistry,
one-shot. Re-use or one-shot the method is similar
to rotory processing. You'll value seeing
the prints come up. Dan

You can see prints "come up" in a Nova Slot processer, that's one of the reasons for using one over a rotary processer.

dancqu · Feb 4, 2007

Dave Miller said:
You can see prints "come up" in a
Nova Slot processer, that's one
of the reasons for using one over
a rotary processer.

I thought they might have to
be withdrawn. Dan

Dave Miller · Feb 4, 2007

dancqu said:
I thought they might have to
be withdrawn. Dan

They do, but that's part of the processing routine. You can lift the print up at anytime to inspect progress.

NOVA slotprocessor leakage

BBonte

Neal

dancqu

BarryWilkinson

Dave Miller

dancqu

Dave Miller

Privacy & Transparency

Privacy & Transparency