Nikon FE light meter calibration

harrygrey382

Member
Joined
Apr 12, 2009
Messages
31
Location
Australia -
Format
35mm
My FE is 1.5 stops in front of my FM and FM2n. I could put the ASA setting 1.5 stops down, but when using ASA 20 that isn't an option (as it will only go down to 12). Would any body be able to give me some pointers about where to start? I'll strip it down etc., but where do you adust the meter?

Thanks for any help
Harry
 

CGW

Member
Joined
Apr 19, 2010
Messages
2,896
Format
Medium Format
This reminds me of the old Chinese saying about the man with one clock always knowing the time but the man with 2 or more never being sure. I amuse myself with this exercise, usually in the dead of winter,and conclude''"why worry?" Sometimes focus screens can figure into the puzzle but so too can exposure compensation settings--is everyone on the same page? Teardown seems extreme. Why not just err on the side of over-exposure with C41 films and/or work within an adjusted ISO range?
 

fotch

Member
Joined
Mar 16, 2005
Messages
4,774
Location
SE WI- USA
Format
Multi Format
Send it out, replace it, shoot in manual mode and hand held meter.

Or, get the exposure with the meter, switch to manual, and adjust the setting for the error.
 

CGW

Member
Joined
Apr 19, 2010
Messages
2,896
Format
Medium Format
IMHO, no. By means of ISO adjustment or the exp. comp dial, just get it close what your known-accurate cameras say. Put a note to yourself in the memo slot on the back.
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,970
Location
U.K.
Format
35mm
If it bothers you take it to a camera technician and have it adjusted by someone who knows what they're doing, to try and dismantle it yourself would be foolish if anyone could fix their own camera there wouldn't need to be such a thing repairers.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…