Nikon FA Aperture Issues

Curved Wall

A
Curved Wall

  • 3
  • 0
  • 60
Crossing beams

A
Crossing beams

  • 9
  • 1
  • 79
Shadow 2

A
Shadow 2

  • 3
  • 0
  • 57
Shadow 1

A
Shadow 1

  • 3
  • 0
  • 55
Darkroom c1972

A
Darkroom c1972

  • 3
  • 2
  • 102

Recent Classifieds

Forum statistics

Threads
198,837
Messages
2,781,623
Members
99,722
Latest member
Backfocus
Recent bookmarks
0

Snapshot

Member
Joined
Jan 10, 2007
Messages
913
Location
Toronto, Ont
Format
Multi Format
Hi All,

I have a used Nikon FA that I'm having Av issues with. The spring aperture mechanism for the lens mount does not retract all the way to the starting position with I remove a lens. There seems to be a little stiffness and as a results it does not retract completely. Even if I pull the mechanism into place, the camera does not recognize certain apertures while in Av mode.

Anyone else have a similar problem and, if so, what did you do to resolve it? I'm not sure if the camera it worth getting repaired and it does work fine in Tv and Program modes without difficulty.
 

PhotoJim

Member
Joined
Oct 9, 2005
Messages
2,314
Location
Regina, SK, CA
Format
35mm
Is it bent? I had a camera once that was damaged from mounting a lens improperly, and that's what happened to the AI coupling ring that you're talking about.

Sometimes just playing with the ring and giving it a lot of activity can free it up, but if it's bent it will probably require repair.

I'd recommend that you get the work done - the FA is a great camera and you'll be free to use A and M modes if you do that.
 
OP
OP
Snapshot

Snapshot

Member
Joined
Jan 10, 2007
Messages
913
Location
Toronto, Ont
Format
Multi Format
Thanks for your response. I doesn't appear bent but it does stick so there may be some warping that prevent free operation. I do agree with you regarding the FA, so I'll get it looked at.
 

lens_hacker

Member
Joined
Jul 26, 2007
Messages
173
Format
35mm RF
You might try a VERY SMALL amount of Ronsonol (lighter fluid) or 99% Isopropyl Alchohol. I do this with my older cameras. Used it to free up the rings on a Retina IIIS and repair many stuck shutters on Canonets.

Sometimes a lubricant or dirt/grime messes these little mechanisms up. Sometimes, a little solvent helps. Use a very small amount.

HOWEVER: The FA is a great camera, and a general CLA will always make it work better.
 
OP
OP
Snapshot

Snapshot

Member
Joined
Jan 10, 2007
Messages
913
Location
Toronto, Ont
Format
Multi Format
You might try a VERY SMALL amount of Ronsonol (lighter fluid) or 99% Isopropyl Alchohol. I do this with my older cameras. Used it to free up the rings on a Retina IIIS and repair many stuck shutters on Canonets.

Sometimes a lubricant or dirt/grime messes these little mechanisms up. Sometimes, a little solvent helps. Use a very small amount.

HOWEVER: The FA is a great camera, and a general CLA will always make it work better.
Where would I apply the lubricant? Would I have to remove the lens mount first or can I just apply it to the AI ring?
 

lens_hacker

Member
Joined
Jul 26, 2007
Messages
173
Format
35mm RF
I've not had to do this to any of my AI Nikons with rings, they just have not been sticky(Nikkormat FT3, FM, FE2, EL2, F3).

On the Retina IIIS and on some of my fixed-lens cameras with aperture/shutter rings, and a Canon 50/1.4 RF lens- I apply a small amount on the outside of the ring. I would try that first on the Nikon AI ring, then work it a little. If it frees up, swab it with a Q-Tip. That worked on my Retina IIIS and a Konica S2, as well as the sticky Canon aperture ring.

I would not remove the lens mount unless you've got some experience assembling and disassembling cameras. The latter is always easier...
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom