Hi all,
I've recently been seeing a few Nikon F4 bodies for sale that mention 'lcd bleed', it was something I've heard of, and fortunately mine is fine, but is it common? Any idea what causes it? Is it just down to age, or storage or bad luck?
When Nikon introduced the F3, they anticipated that the LCD would start to fail within the lifetime of the camera and expected to have those LCDs replaced. However, the vast majority have remained clear.
Same for the F4.
I've been told the main reason they start to bleed, other than shock, is very high temperatures.
Mine has a small bleed on the lower LCD--it was that way when I bought it. (The lower LCDs are on the viewfinder, and can be switched ot by replacing the viewfinder. The upper LCDs as well as the LED for focus confirmation are actually on the body itself. To replace those these days requires a new body.)
Mine has a small bleed on the lower LCD--it was that way when I bought it. (The lower LCDs are on the viewfinder, and can be switched ot by replacing the viewfinder. The upper LCDs as well as the LED for focus confirmation are actually on the body itself. To replace those these days requires a new body.)
Is the bleeding from age or usage? As in, if you bought a next to unused F3 (or F4), and it doesn't have any lcd bleed, it should remain like that for decades?
Is the bleeding from age or usage? As in, if you bought a next to unused F3 (or F4), and it doesn't have any lcd bleed, it should remain like that for decades?
My F3/T bought new in 1988 has no LCD bleed. I think it is shock or very high temperatures that can cause it.
EDIT: my other F3/T from 1983 has no bleed either. For the F4s, one is entirely free of LCD bleed and the other has slight bleed at the extreme right edge of the lower LCD.