For Sale Nikkormat FT

[davela]

I am selling a Nikkormat FT body. Everything seems to be working and in reasonably good condition, even the meter. The meter action is a bit "jumpy" as one turns the aperture dial (common problem with Nikon), but it seems to settle down at fixed settings. The light seals could use renewal as with most vintage SLR's. A quality camera for pocket money!

Price: $20 plus shipping

 

[E. von Hoegh]

Hah. It's mine, now. The pictures don't do it justice and it came with a working Wien cell. The cap for the cell compartment isn't as bad as the photo makes it look, either.

 

[Grif]

Hah. It's mine, now. The pictures don't do it justice and it came with a working Wien cell. The cap for the cell compartment isn't as bad as the photo makes it look, either.

Waaaa,,,,, for $20??? Wow. It would look much better sitting next to mine;-)

Too bad about the Wien cell. I gave up on my Ftn and sent it to a guy in North Seattle for a converson and calibration for silver cells. Of course it cost almost the same as an F body did back in the day. Tickled pink with the conversion and service.

Nikon-John,,, or Ftn-John? Anyway, on here somewhere gave me the address. Great service,,, cranky guy (not john) ;-) Not sure if he can do the same conversion on a N'Mat.

 

[E. von Hoegh]

Grif, the Nikkormats were calibrated at the factory by swapping resistors, according to the Nikon service manual. There were kits of resistors for servicing them. Also the 'mats work on a single cell, not two like the FTN finders.\

I use 675 hearing aid cells, they last a long time if you glue over 3 of the 4 airholes.

 

[Grif]

Not likely I'll ever add another body to my Nikon stuff. I'll keep it till I go out feet first. Now,,, some of the other stuff.... trying to decide how to sneak in a new camera without totally selling off everything else ;-)

 

[John_Nikon_F]

Waaaa,,,,, for $20??? Wow. It would look much better sitting next to mine;-)

Too bad about the Wien cell. I gave up on my Ftn and sent it to a guy in North Seattle for a converson and calibration for silver cells. Of course it cost almost the same as an F body did back in the day. Tickled pink with the conversion and service.

Nikon-John,,, or Ftn-John? Anyway, on here somewhere gave me the address. Great service,,, cranky guy (not john) ;-) Not sure if he can do the same conversion on a N'Mat.

That would be John_Nikon_F. Close.

Anyway, shop's name is Camera Clinic. 206-367-2440. Guy's name is Doug. Not really cranky, but an inveterate smartass. Conversion is $59 on an FT or FTn 'mat. Involves installing a shottky diode. Once that is done, you can run the fairly common V 625 U batteries. Or, with a spacer, a V76PX...

I think, that if I go back to using a 'mat, I'll stick to FT2's and FT3's... They're already converted, and have some other upgrades as well.

-J

 

[E. von Hoegh]

That would be John_Nikon_F. Close.

Anyway, shop's name is Camera Clinic. 206-367-2440. Guy's name is Doug. Not really cranky, but an inveterate smartass. Conversion is $59 on an FT or FTn 'mat. Involves installing a shottky diode. Once that is done, you can run the fairly common V 625 U batteries. Or, with a spacer, a V76PX...

I think, that if I go back to using a 'mat, I'll stick to FT2's and FT3's... They're already converted, and have some other upgrades as well.

-J

The procedure of which conversion is: Remove two screws holding bottom plate, lift off plate. Desolder wire from cell compartment. Solder diode in series with cell compartment and meter circuitry, replace plate and screws. $59 for 10 minutes work. The FTN finders for the Fs are simply recalibrated, which is a considerably more involved procedure.

 

[John_Nikon_F]

Yep.