New Ground Glass

bmac

Member
Joined
Sep 30, 2002
Messages
2,154
Location
San Jose, CA
Format
Multi Format
I've got a rookie 4x5 question for y'all. I have a crack in the glass on my ORbit (tank) 4x5. Can I use any groundglass, or do I need a special type? Thickness, etc.

Brian
 
OP
OP

bmac

Member
Joined
Sep 30, 2002
Messages
2,154
Location
San Jose, CA
Format
Multi Format
Ok, not making sense this evening... I've been watching the baby all day, my brain is mush! My question basically is.. is Groundglass sold in standard thicknesses and sizes.

Brian
 

Jorge

Member
Joined
Sep 6, 2002
Messages
4,515
Format
Large Format
I hate to sound like a smart ass.....well maybe not
.But why dont you measure the thickness of your glass with calipers and get one of the same size? I beleive glass for ground glass is 2mm thick. But I could be wrong so please check before you buy. There are a couple of guys in E bay making ground glass so maybe they can help you better. If worse comes to worse you can have 2mm glass acid etched and adjust with shims in your camera once you replace it. Easiest way to do it would be to remove the back, take a tootpick and measure the depth of the GG. make a mark on the tootpick and when yo replace the GG adjust it until it has the same depth. Or, pay someone who knows what he is doing to do it for you..lol...
Later, let us know what happend....
 

EUGENE

Member
Joined
Sep 7, 2002
Messages
38
Brian, I think Calumet carries the replacement for that groundglass. They are easy to replace if you get the correct size and thickness. The metal clips that hold the groundglass can be bent, slightly, to accomodate different thicknesses of glass, up to a point. As long as you don't change the position of the ground surface, slight variences in thickness are O.K.
 

David A. Goldfarb

Moderator
Moderator
Joined
Sep 7, 2002
Messages
19,974
Location
Honolulu, HI
Format
Large Format
The only potential problem would be if you have a one-piece fresnel/glass combination with the fresnel between the focusing surface and the lens. I don't think such things existed in the days of the Orbit, so it shouldn't be a problem. The focusing surface usually rests directly on the frame, sometimes with shims underneath it. As long as the focusing surface is in the right place the thickness of the glass isn't too important.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…