Need to change mixer chambers?

fidget

Member
Joined
Nov 13, 2006
Messages
62
Location
North West E
Format
Medium Format
Hi, another newbie type of question.
I presently print B&W from 35mm, 645 and 6x6 negatives. I found that it was a major pain to setup my diffusion enlarger (M670) for the switch between 35mm and 120 films, particularly in regard to changing the mixing chamber. I tried a few prints from 35mm using both the correct chamber and the one for 6x7. I couldn't see a difference in the quality of the print (but as a beginner, maybe I wouldn't), so now leave the 6x7 chamber fitted. Aside from a difference in exposure times, is it a mistake to use the larger chamber?
( A solution is currently being implemented, a second enlarger, for 35mm and flashing, but I am curious)
Regards, Dave....
 

Dave Starr

Member
Joined
Nov 7, 2004
Messages
110
Location
Flint, MI
Format
4x5 Format
I always used the 6x7 mixing chamber when I used a Beseler 67C, an now i use the 4x5 chamber on my D5 all the time. Never had a problem.
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
I have tested using the correct mixer for 35mm, the 4x5 mixer chamber for 35mm and the 120 mixer chamber. I find that there is about 1 stop speed difference between each. Now this is approximate, but here is an example.

If I use 12" at f16 for the 35mm chamber from 35mm negs at 8x10 enlargement, I use f11 with 120 and f5.6 with the 4x5 chamber. They do concentrate the light differently.

I find that the color is about the same, but my Dichro 45S shows a slightly different balance on the LED readout as well.

PE
 
OP
OP

fidget

Member
Joined
Nov 13, 2006
Messages
62
Location
North West E
Format
Medium Format
Thanks for the replies.
Aside from differences in light intensity, does the use of a larger than required mixing chamber have any averse effect on the print?

Dave..
 

fschifano

Member
Joined
May 12, 2003
Messages
3,196
Location
Valley Strea
Format
Multi Format
None. I use the largest light box (4x5) for everything with my Omega D4. Yes, I could get shorter exposure times if I used the smaller format light boxes with the smaller format negatives, but I don't see this as an advantage. Printing times can be almost too short for me sometimes. I like the longer exposure times because it makes dodging and burning maneuvers so much easier and accurate. If you aren't doing high volume production where a few extra seconds for each print starts adding up to some real time, don't worry about it.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…