Need thumbscrews for Horseman SW612 lens

[Paul Ozzello]

Hope someone can help out. I need the four thumbscrews that mount a Horseman lens/board to a SW612.

 

[Sgore]

McMaster Carr will likely have something that will work.
https://www.mcmaster.com/thumb-screws

 

[ic-racer]

 

[Paul Ozzello]

View attachment 238583

I gave them a call. They've never even seen a Horseman

 

[AgX]

-) Why do they need to be thumbscrews? Small Allen screws should do well too.
(If you do not want to use an Allen key, you might try filing ridges into the heads.)
-) there are thumb knobs to be installed on sink-head screws, turning them into thumbscrews
-) thumb screws are available off the shelve at few shops specialized in rare screws (post #2)
-) any machine shop doing single part jobs can easily turn you a thumb screw

The size of the Horseman thread for sure some Apugger can tell you.

 

[ic-racer]

I gave them a call. They've never even seen a Horseman

That is odd, I get all my Horseman parts from them.

 

[Paul Ozzello]

-) Why do they need to be thumbscrews? Small Allen screws should do well too.
(If you do not want to use an Allen key, you might try filing ridges into the heads.)
-) there are thumb knobs to be installed on sink-head screws, turning them into thumbscrews
-) thumb screws are available off the shelve at few shops specialized in rare screws (post #2)
-) any machine shop doing single part jobs can easily turn you a thumb screw

The size of the Horseman thread for sure some Apugger can tell you.

The camera uses interchangeable lenses so it would be easier to use screws that don't require a tool. They actually need to be captive screws - preferably with a knob. I did a rough measurement and it looks like the diameter is 3mm - but it would be nice to have someone confirm the actual size.

 

[Paul Ozzello]

That is odd, I get all my Horseman parts from them.

Strange. KHB photographix in Ontario Canada ? He didn't even know what camera I was talking about and suggested contacting shops in the US.

 

[AgX]

So you already got apt screws and just want a second set-of-four to install on a further lens.

The special thing with those lensboard screws seems that at the screws the thread is not going to the head and that the lens-board is threaded too, by that keeping the loose screws from falling out.

This of course complicates the matter !!
In case of buying thumbscrews off the shelf you would need to grind off the thread near the head.

 

[Paul Ozzello]

So you alreeady got apt screws and just want a second set-of-four to imstall an a further lens.

Yes, I have several lenses - all with screws. But one lens is missing all 4 screws. Since they are captive screws they don't fall off the lensboard when I take the lens off the camera. I could take out the screws completely each time but it's not very ideal.

 

[Paul Ozzello]

Just as a followup for anyone also missing these screws, I was able to get in touch with Toyo View in the uk and they were able to get them from Japan.