NEED LIQUID DEVELOPER FOR ROAD TRIP

That's not a bad idea. Use some of each under similar conditions, and then later, sit back and look at them carefully, make a few prints, and see which one I like best. Both developers and the other concentrates are available in Toronto before we set out.

I'd probably go with Diafine if I could get it.

Make a 1 litre batch (or your tank size plus say ~30%) before you go. Then you'll have 2 x 1 litre bottles (A and B solutions, reusable), plus enough fixer. You won't need to worry about temperature, and your timings don't need to be too accurate either.

Another alternative, already mentioned, is Cafenol. You can easily get whatever you need on the road.

Have fun!

Doesn't anyone use Tetenal Ultrafin liiquid these days?

It's much closer to a liquid D-76/ID-11 than HC-110 and should be available in France. It's my favourite of the various liquid developers I have tried.

Yes, Tetenal UF is easily available here, and it's pretty cheap. I'm getting ready to order some supplies. so I'll get a small bottle and try it out.

Harry Lime said:

I would pass on Rodinal if you are shooting HP5+. Too grainy and Rodinal is not the best developer for medium speed films or push processing.

If you are renting a car, I would just mix up a some D76 and fixer using gallon jugs of water and throw them in the trunk. Be sure to label them as "Film Developer - Do Not Consume"

HC110 was supposedly developed for photo journalists developing their rolls in hotel rooms around the world. It is a thick syrup and a bottle will develop a lot of film.

Click to expand...

A big +1 on the above statements ^ ^.

Rodinal + high speed film is ime a real grain factory, better up with D76/HC110, a litre bottle of HC110 syrup lasts 'forever', just like rodinal.

Thanks, everybody. I'm going with HC-110, and small bottles of the other chems in concentrate. I think the only thing I'll have a stock solution of will be the fixer and the wash agent, which is no problem. I've just ordered some HC-110 and will develop about a dozen rolls to 'feel it out' before we leave. If it works out as well as I hope, I'll just stick with it as my main developer in the future.

Try HC-110 at dilution B and H to see which you prefer.

If you really want D-76 you can get Clayton F-76+ which is a liquid D-76. Freestyle sells it as Arista Premium Liquid. A 1 liter bottle mixed 1+9 and used as a one-shot should do about 30 rolls.

Did you say what cities you are visiting?

It's a minor league baseball/car and racing trip. The plans are: leave Bayfield, Ontario to Akron, OH, (BB), to Bowling Green KY, (Corvette Museum and BB), Memphis, (BB), Jackson, TN, (BB), Little Rock, AR, (BB), Oklahoma City, (BB), Tucumcari, NM, (Route 66), Albuquerque, (BB), Santa Fe, (nice place), Roswell, (UFO's went there, we may as well), Tuscon, (BB), Mesa, (not sure why), Phoenix, (BB), Las Vegas, (BB and Black Jack), Lake Elsinor, CA, (BB), Rancho Cucamonga, (BB and cool name), Pomona, (NHRA Museum), Los Angeles, (gotta see LA), Bakersfield, (BB and drag race), Fresno, (BB), Sacramento, (BB), San Francisco, (visit relative), Eugene, OR, (BB), Portland, (BB), Vancouver, BC, Calgary, AB, (visit family), Medicine Hat, Regina, Winnipeg, etc, working our way back to Bayfield. Forty days on the road.
Really? An actual liquid D-76? Same results, same everything?

Lucky guy. Sounds like a great trip.

Well, I'm not qualified to say Clayton F76+ is exactly like D-76 but as far as I can tell it is.

I like it a lot because it's well priced and easy to use.

Edit: I just googled Clayton F76+ and got a ton of hits. The consensus seems to be it matches D-76.