Need help with Nikon F3HP

JasonC

Member
Joined
Jan 27, 2005
Messages
122
Format
Multi Format
The other day I tried to dust off and use my F3HP for a weekend trip. Put in a fresh set of batteries. Winded the camera to test, and got nothing. The camera is kind of jammed. The LCD does not show anything, which is supposed to show '80' before the counter goes to 1 if I remember correctly. I cannot release the shutter at all. I tried rotating the shutter dial to different speeds, but still cannot release the shutter. And yes, the switch is at the on position with the red dot showing. I haven't used this camera for a long time as I ususally shoot medium and large formats. Maybe I forgot the proper procedure? I did read the instruction manuel again. Any insight? Thanks.

Jason.
 

Barry S

Member
Joined
Jan 28, 2007
Messages
1,350
Location
DC Metro
Format
Large Format
Does the front shutter release work? It should work regardless of electrical power if the mechanicals are ok.
 
OP
OP

JasonC

Member
Joined
Jan 27, 2005
Messages
122
Format
Multi Format
Hi Barry,

Never thought of the front shutter release. I'll try it tonight. Thanks.

Jason.
 

Nicholas Lindan

Advertiser
Advertiser
Joined
Sep 2, 2006
Messages
4,248
Location
Cleveland, Ohio
Format
Multi Format
The LCD does not show anything ... I cannot release the shutter at all

Possibilities:

1) The fresh batteries aren't. Don't be surprised by this, there has been a flood of counterfeit LR44/A76/etc. batteries, most are marked 'Maxell'. If you got your batteries on ebay or some semi/unknown vendor on Amazon then suspect the batteries.

2) The battery contacts are bad.

3) RIP
 
OP
OP

JasonC

Member
Joined
Jan 27, 2005
Messages
122
Format
Multi Format
I cleaned the contacts with alcohol and the F3HP springs back to life. Thanks again for all your helps. Hmm..... I guess I don't have an excuse to get a replacement......

Jason
 

Soeren

Member
Joined
Nov 5, 2004
Messages
2,675
Location
Naestved, DK
Format
Multi Format
I cleaned the contacts with alcohol and the F3HP springs back to life. Thanks again for all your helps. Hmm..... I guess I don't have an excuse to get a replacement......

Jason

Offcource you do. Your camera has now proved itself unreliable
Kind regards
 

rpsawin

Member
Joined
Sep 9, 2002
Messages
524
Location
Orrtanna, PA
Format
Multi Format
I cleaned the contacts with alcohol and the F3HP springs back to life. Thanks again for all your helps. Hmm..... I guess I don't have an excuse to get a replacement......

Jason

No, but you may have built a good "case" for a back up....

Best regards,

Bob
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…