Need help selecting a step wedge. (For cyanotype and van dyke)

Candlejack

Member
Joined
Sep 2, 2021
Messages
228
Location
Louisiana
Format
Med. Format Pan
Its becoming painful obvious Ill need to purchase or make a step wedge. (Most posts seem to address why you need a step wedge, but not which one to get) im also hesitant about making one due to printer availability and density of the printers ink.

What step wedge would you recommend? Ive read about the stouffer 21, but I see there are other ones are the market. Im not looking to sell my first born to afford one though.
 

removed account4

Subscriber
Joined
Jun 21, 2003
Messages
29,832
Format
Hybrid
I look forward to reading the answers to your post!
I’m always amazed at how complicated people make simple processes .
It’s like the guy on the IG who says it takes 9hours to make a simple print…
To each their own
 
OP
OP

Candlejack

Member
Joined
Sep 2, 2021
Messages
228
Location
Louisiana
Format
Med. Format Pan
jnantz said:
I look forward to reading the answers to your post!
I’m always amazed at how complicated people make simple processes .
It’s like the guy on the IG who says it takes 9hours to make a simple print…
To each their own
Click to expand...
Yup, Im just having issues with over exposure/under exposure etc. The issue lies in my negatives, but im hope this will help. Also thinking about building a light box using blacklight tubes
 

removed account4

Subscriber
Joined
Jun 21, 2003
Messages
29,832
Format
Hybrid
Candlejack said:
Yup, Im just having issues with over exposure/under exposure etc. The issue lies in my negatives, but im hope this will help. Also thinking about building a light box using blacklight tubes
Click to expand...

i” ve just done test prints, the chemistry costs very little and takes very little time.. where are you located ? Light box is a simple and great investment.
good luck !
John
 
Last edited:
OP
OP

Candlejack

Member
Joined
Sep 2, 2021
Messages
228
Location
Louisiana
Format
Med. Format Pan
jnantz said:
i” ve just done test prints, the chemistry costs very little and takes very little time.. where are you located ? Light box is a simple and great investment.
good luck !
John
Click to expand...
Im down in southern Louisiana. Ive been using sunlight to expose, but our weather fluxates so much!
 

removed account4

Subscriber
Joined
Jun 21, 2003
Messages
29,832
Format
Hybrid
Candlejack said:
Im down in southern Louisiana. Ive been using sunlight to expose, but our weather fluxates so much!
Click to expand...
People have good luck with these ( on Amazon )
Barrina T5 UV LED Blacklight Bar 2ft 9W Black Light Fixture for Blacklight , Poster and Party Fun Atmosphere with Built-in ON/Off Switch(4-Pack)
. I’m in the northeast and the sun is useful but not too consistent….have fun!
John
 

Nicholas Lindan

Advertiser
Advertiser
Joined
Sep 2, 2006
Messages
4,248
Location
Cleveland, Ohio
Format
Multi Format
Candlejack said:
I'm down in southern Louisiana ... our weather fluxates(sic *) so much! ... I looked at their website earlier. They had so many different products
Click to expand...

The Stouffer T2115, about 1/3 down the list, seems the best bet.

--
* (Urban Dictionary) "Fluxate: To vent one's emotional baggage..." Well, Ida certainly did that.
 

Andrew O'Neill

Moderator
Moderator
Joined
Jan 16, 2004
Messages
12,057
Location
Coquitlam,BC Canada
Format
Multi Format
I've used a Stouffer 21 for roll film and the 31 for sheet film for many years. Step wedges will give you a lot of info about your film of choice, developer used. by contact printing one onto a piece of film that you use, you can then print it on your paper to see what density range is. It doesn't have to be complicated, in fact densitometre not required.
 

Andrew O'Neill

Moderator
Moderator
Joined
Jan 16, 2004
Messages
12,057
Location
Coquitlam,BC Canada
Format
Multi Format
jnantz said:
Whew!!
Ive only read about peeps using a wedge and then well… it seemed like an MIT. Dissertation was needed afterwards to make a 22second exposure..
Click to expand...

HAHA nope! I'm not the sharpest knife in the drawer, and I can work with one
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…