My wife found out I have THREE 4X5 view cameras and indicated at least one has to go...
For sale is a Nagaoka 4X5 Model (S/N 512) I that I have had and have been using for over a year.
Movements: it is capable of front rise/fall and front/rear tilt. Bellows draw is sufficient for a lens at or below 300mm focal length.
Movements are smooth and all the locks work. Except for the crack noted in the images posted there is no damage to the camera. As there is a large metal plate on the outside that fastens in multiple locations I never really messed with any sort of repair.
I have not been able to pedigree the age of the camera.
Virtually no scuffing to be found, all the metal bits are in excellent condition, plating is bright and the bellows is undamaged. I can provide close up shots of any portion of the camera upon request.
A Fresnel screen is installed which helps considerably with the image brightness when focusing and composing.
Included are a set of seven lens boards that I 3D printed from PETG filament. They are very durable and work fine. I am told the Technika Lens boards will also fit. Back side of one board is shown so you can see the raised stiffener on the back side.
Four: Copal 0 (flat)
Two: Copal 1 (flat)
One: Copal 1 Extended (3/4")
The camera is a lightweight at just under 3 pounds and quite compact. Detailed pictures can be provided upon request. Camera is located in the Phoenix Metro area and can be picked up locally.
$550 plus actual insured shipping costs. PayPal (prefer Friends and Family, if you use Goods and Services the fee will be need to be added) I also accept USPS MO, checks and cash.
For sale is a Nagaoka 4X5 Model (S/N 512) I that I have had and have been using for over a year.
Movements: it is capable of front rise/fall and front/rear tilt. Bellows draw is sufficient for a lens at or below 300mm focal length.
Movements are smooth and all the locks work. Except for the crack noted in the images posted there is no damage to the camera. As there is a large metal plate on the outside that fastens in multiple locations I never really messed with any sort of repair.
I have not been able to pedigree the age of the camera.
Virtually no scuffing to be found, all the metal bits are in excellent condition, plating is bright and the bellows is undamaged. I can provide close up shots of any portion of the camera upon request.
A Fresnel screen is installed which helps considerably with the image brightness when focusing and composing.
Included are a set of seven lens boards that I 3D printed from PETG filament. They are very durable and work fine. I am told the Technika Lens boards will also fit. Back side of one board is shown so you can see the raised stiffener on the back side.
Four: Copal 0 (flat)
Two: Copal 1 (flat)
One: Copal 1 Extended (3/4")
The camera is a lightweight at just under 3 pounds and quite compact. Detailed pictures can be provided upon request. Camera is located in the Phoenix Metro area and can be picked up locally.
$550 plus actual insured shipping costs. PayPal (prefer Friends and Family, if you use Goods and Services the fee will be need to be added) I also accept USPS MO, checks and cash.
