Ooogh ! More power to you. I'm not about to tackle shutter work.Funny, I just got a Beauty Lightomatic LM in the mail yesterday with a blown shutter! I have it stripped down and am attempting to repair the "Salad" of shutter and aperture blades that fell out from behind the front lens element. It's a bit daunting, but the camera was so inexpensive I have little to lose. I got the shutter disasembled last night, cleaned and reinstalled the aperture blades and will tackle next the shutter blades. Reassembly will be the big hurdle...
If successful, I will be able to place it alongside my Lightomatic II, which is near pristine.
Beauty made some very good cameras, but they can be a bear to service; especially the Copal SVL which has those danged pc connection wires that break so easily and fiddly little screws and insulator washers for the pc connector!
View attachment 260734
It takes extra salty language to make it happen properly...Ooogh ! More power to you. I'm not about to tackle shutter work.
I heard about a 150mm, but never saw it.What other lenses can be mounted on this body?
Yes it seems to be the same mount (40mm) but the back of the lens has a beveled angle on one side (top) so that the mirror don't hit the lens.I suspect your camera and the Agiflex use the same smaller screw thread mount, but a bit more research is needed.
Thank you !Wow, what a beauty!
Thank you !Gorgeous!!!
In case you don't know already, one trick is to assemble the blades wetted with naphta. Surface tension keeps them from jumping around. Of course they must be 100% clean to start with. Once assembled, drain the naphta with tissue papaer and be patient until it has all evaporated. Good luck.I got the shutter disasembled last night, cleaned and reinstalled the aperture blades and will tackle next the shutter blades. Reassembly will be the big hurdle...
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?